How do I reset my Jabra speaker?

How do I reset my Jabra speaker?

To reset the Jabra speakerphone, simultaneously press and hold (8 seconds) the Answer call button and the End call button until ‘Factory reset’ is announced. Resetting the Jabra speakerphone clears the list of paired Bluetooth devices and also clears all personalized settings.

How do I update my Jabra Freeway firmware?

On the support page for your Jabra device, go to the Updates section and select your preferred language. Click Download, and then open and run the file. If you are prompted with a security warning, click Yes. Turn off your device, and connect it to your computer using the supplied USB cable.

How do I pair my Jabra Freeway speaker?

To enter pairing mode, simultaneously press and hold (5 seconds) the Answer/end button and slide the On/off switch to “on”. The light flashes blue, and pairing instructions are announced. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Freeway from the list of available devices.

How do I pair my Jabra to my phone?

Android. Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your Jabra headphones or headset come up in the list, tap it and it should be paired with your phone.

How do you reset a Jabra Freeway?

Follow these steps to reset:

1. Turn on the Jabra Freeway by switching the On/off switch to the “on” position.
2. Simultaneously press and hold (5 seconds) the Answer/end, Voice, and Mute buttons until you hear a beep tone.
3. The Jabra Freeway is now reset and is ready to pair again.

How do I update my Jabra speaker?

Prerequisites

1. Turn on and connect your device to your computer using the USB cable or Jabra Link Bluetooth adapter.
2. In Jabra Direct, select your device.
3. Click the Update now button (or the Updates icon on the left menu) to open the Updates window.
4. Next to your listed device, click Update to open the update dialog.

How long does a Jabra firmware update take?

A firmware update may take up to 15 minutes. During the update, do not open the charging case until at least 10 seconds after the LED has stopped flashing. When the update is completed, the charging case LED will briefly flash green and then turn off.

Why is my Jabra Bluetooth not working?

On your mobile device, turn Bluetooth off and on. Try to pair your Jabra device using a different mobile device. This is to confirm that a different mobile device will find and pair with your Jabra device. If you still cannot pair your Jabra device with your mobile device, contact support.

Where is the multifunction button on Jabra?

The earbuds can be turned on or off individually by holding the Multi-function button on the right earbud, or the Volume down button on the left earbud, until the LED flashes green (on) or red (off). The right earbud can be used alone for mono playback or for calls.

How do I know when my Jabra Freeway is fully charged?

Plug the car charger into your car’s power outlet . The charging indicator light will light up in red while charging . When the Jabra FREEWAY is fully charged the indicator light will turn off . A full charge takes approximately two hours .

How do I connect my Jabra Bluetooth to my Iphone?

To enter pairing mode, press and hold (5 seconds) the Multi-function button until the Bluetooth indicator flashes red and blue. Pairing mode is then announced in the headset. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Step Wireless from the list of available devices.

How do I Reset my Jabra freeway to pairing mode?

That will reset the unit.  Turn on power button & press “VOICE” button and SAY “PAIR NEW DEVICE” to enter paring mode.  Search for the Bluetooth device from your Bluetooth menu and select Jabra Freeway to complete paring.  The next time you power on the Jabra FREEWAY it will automatically go into pairing mode.

Are there any problems with the Jabra freeway speaker?

Common problems with the Jabra Freeway Bluetooth speaker include challenges with pairing, audio problems, and issues granting the device access to the contact list on your phone. The Jabra Freeway Bluetooth speaker automatically connects to the last device that was connected to it.

How do you connect Jabra Supreme to Bluetooth?

Turn on power button & press “VOICE” button and SAY “PAIR NEW DEVICE”to enter paring mode. Search for the Bluetooth device from your Bluetooth menu and select Jabra Supreme to complete paring. Reset Turn the SUPREME on while pressing the VOL+ and Answer/end button for about 6 seconds.

What’s the best way to reset a Jabra headset?

Reset the Jabra headset by plugging it into its charger for 5 to 10 seconds ONLY. Note that leaving the headset plugged in for more than 10 seconds will only give it a brief charge and will NOT reset it.