How do I reset my Concord 4 panel?

How do I reset my Concord 4 panel?

How To: Reset Installer Code Concord 4

1. unplug alarm from outlet.
2. locate eprom.
3. remove eprom.
4. wait 2 minutes.
5. can verify as keypad will do nothing by trying options.
6. plug prom back in.
7. plug power back in.

How do you get into programming on a Concord 4 panel?

To enter program mode: Press 8, 4321, 0, 0. The display shows SYSTEM PROGRAMMING.

How do you bypass the sensor on a Concord 4?

1. Close all doors and windows.
2. Arm your system in STAY or AWAY mode.
3. Press # + CODE.
4. The keypad will display “BYPASS SENSOR _ _”, enter the sensor you wish to bypass.
5. The keypad will display “BYPASSED ZONE _ _” or “SENSOR _ _ BYPASSED”.

Where is the master code on Concord 4?

To change the Master Access Code: Press B button (down arrow button to the right of the LCD display), until display reads User Codes, then press #. 3. Display will read Regular User Codes. Press B button until display reads System Master Code.

How do I turn off my GE alarm without code?

Access the Main Control Panel of Your Alarm System

1. Remove the AC power to the home alarm console from the wall directly.
2. Use your console’s access key (or another item such as a small screw) to unlock and open the system’s backing.

How do I change Master Code in Concord 4?

Alphanumeric LCD Keypads

1. Press 9 then enter the Master Code to display SYSTEM MENU then TIME-DATE.
2. Press A or B buttons until USER CODES then press #, REG CODES displays.
3. Press A or B button to scroll to SYSTEM MASTER CODE then press # to select.
4. Enter new Master Code then press # to save.

How to troubleshoot a GE Security Concord 4 and turn off?

It can also beep when a false alarm is sent to the panel by a malfunctioning sensor. Troubleshoot your GE Security Concord 4 and stop the beeping alarm system. Enter your four-digit user code to turn off the beeping alarm on the keypad. Press the asterisk key on the GE Security Concord 4 keypad twice to get to the system status report.

How does the Concord 4 alarm system work?

The Concord 4 alarm system features an LCD keypad that spells out your security system status in an easy-to-understand manner. Security system trouble messages usually announce themselves through your keypad beeping. This is your first “warning” to check on the status and address any potential issues.

What is the user manual for Concord 4?

The Concord 4 User Manual (P/N 466-2183) contains user worksheets that you should fill out during the installation and programming of the system. For multiple-partition systems, we suggest a user manual for each partition. Read these instructions and all related documentation entirely before installing or operating this product.

Why do I get trouble messages on my Concord 4?

One of the most common security system trouble conditions occurs when the system’s backup battery (shown inside a Concord 4 panel) requires changing. Many trouble messages stay in place after you read them. This usually indicates an ongoing issue and not simply an “old” status.