What is the go button on a Brother printer?

What is the go button on a Brother printer?

If the printer is in Sleep mode, press the Go button to wake the printer up and go to the Ready state. If there is an error, the printer will recover automatically from some errors. If an error is not automatically cleared, press the Go button to clear the error, and then continue to use the printer.

Is the Brother HL 2140 a wireless printer?

The HL-2170W is a network laser printer that is ideal for home or home office printer sharing. Offering the same print speed, footprint and paper handling as the HL-2140, the HL-2170W also includes built-in Ethernet and wireless 802.11b/g network interfaces for connecting to your wired or wireless network.

How do I reset my Brother HL 2170W network settings?

Press the GO button 7 times with 5 seconds. The network card is now reset. With the printer power turned on and the printer Ready, hold down the GO button for about 15 seconds. Release the GO button when the printer prints a Network Configuration page.

Where is on/off button on Brother printer?

1. The Brother printer has an ON/OFF switch located on the right side of the printer.

How do I reset my Brother HL 2140 printer?

It is possible to manually reset the printer to remove this message:

1. Ensure the printer is turned off.
2. Open the printer front cover.
3. Hold the Go button while turning the printer on.
4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
5. Press the Go button two (2) times.

How do I connect my Brother printer to the WIFI?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

Where do you find the IP address on a Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

How do I turn on my Brother printer?

Press and hold the ON/OFF button down, and then insert the power cord back into the Brother machine. Do not release the ON/OFF button until the machine has been powered on completely or after 15 seconds.

How do I turn off my Brother printer HL?

How do I turn off my Brother machine?

1. To turn off your Brother machine, press and hold the.
2. – Once the LCD reads ‘Shutting Down,’ it will stay on for a few seconds before turning itself off.

How do I reset my brother hl 2140 drum unit?

To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.

How do I bypass the toner light on a Brother printer?

Press the ‘go’ button (or ‘start’ button) 5 times. The toner light should be off (the error may be flashing). The paper light should be on or flashing. Close cover.