How do you set up OpenSprinkler?

How do you set up OpenSprinkler?

OpenSprinkler has a built-in web interface that works with most desktop and mobile web browsers. Just open a browser and type in the controller’s IP address of the controller. We also provide a free OpenSprinkler mobile app. To install OpenSprinkler mobile app, search ‘OpenSprinkler’ in your app store and install it.

Why are multiple sprinkler zones coming on at the same time?

Water is coming out of multiple zones at the same time: For the valves to stay open in one zone, while shutting outlets in other zones, there needs to be a minimum amount of water pushed through the valve. To investigate further causes and solutions, go to our FAQ page and look under “Indexing Valves.”

How do I update OpenSprinkler pi?

B. Upgrade a previously installed Unified Firmware

1. Open an SSH connection with the Raspberry Pi.
2. Change to the OpenSprinkler directory: cd /home/pi/OpenSprinkler-Firmware.
3. Update OpenSprinkler: git pull.
4. Re-build OpenSprinkler: sudo ./build.sh ospi.
5. Restart OpenSprinkler: sudo /etc/init.d/OpenSprinkler.sh restart.

How do I reset my OpenSprinkler?

To perform a factory reset: first unplug the main power; then plug the power back, as soon as you see the OpenSprinkler logo, ​press and hold push-button B1​, and continue holding B1 until the LCD displays ‘Reset?’

How do you reset an open sprinkler controller?

Reset: hold B2 while starting the controller, until you see the Reset screen. Select yes and then hold B3, a hardware reset will be triggered, and the controller will recover to default settings.

Should you run all sprinkler zones at once?

Running multiple zones at once is usually not possible due water-pressure and flow limitations at residential properties. using more than one program would enable you to water the lawn Stations 1, 2, and 3 on program A and station 4 to soak the flowers with drip irrigation on program B.

Is there an opensprinkler board for Raspberry Pi?

OpenSprinkler Pi (OSPi) is an extension board for Raspberry Pi (RPi 0; RPi 1 Model A+/B+; RPi 2; RPi 3). It allows RPi to directly access and control sprinkler valves. It comes with a set of laser cut acrylic enclosure.

What is the circuit of the opensprinkler Pi?

The circuit of OSPi is a subset of the OpenSprinkler and consists of a 24VAC to 5VDC switching converter, a shift register, triacs, DS1307 RTC and backup battery, and PCF8591T A/D D/A converter. OSPi makes use of four of RPi’s GPIO pins to control the shift register, and two I2C pins (SDA, SCL) to interface with the built-in RTC and ADC converter.

How to visualize a program in opensprinkler?

You can visualize programs using the preview feature, and check station runs through graphical plots of the logging data. Use a master zone or pump; run zones in sequence or parallel; easily expand the number of zones; give each zone and each program a custom name — these are all supported by OpenSprinkler.

Is the opensprinkler enclosure the same as the OSPI?

OSPi uses the same enclosure as OpenSprinkler. To do so, you first secure the RPi to OSPi by leveraging the onboard copper separation pillars and screws, then fit the two of them together into an existing OpenSprinkler enclosure.