How do I access my Linksys E2500 router settings?

How do I access my Linksys E2500 router settings?

Configuration for Linksys routers: E1200, E1500, E2500, E3200, E4200, WRT160n

1. Access the router’s browser-based utility. Log into your router’s browser-based utility by entering 192.168.
2. Go to the “Setup” menu. Click on the “Setup” tab.
3. Go to the “Basic Setup” page.
4. Enter the first DNS resolver.
5. Save your settings.

How do I reset my Cisco WRT120N router password?

How to Reset the WRT120N Password

1. Turn the router around so you can see the plugged-in cables and the red Reset button.
2. Use a paperclip or pin to press the Reset button for approximately 5 seconds.
3. Remove the power cable from the back of the WRT120N for a few seconds, then plug it back in.

How do I Reset my router to factory settings?

There are two ways to reset the Router to its factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration > Factory Defaultsscreen of the Router’s browser-based utility. Power The Power port connects to the included power adapter.

Where is the reset button on a Linksys router?

Reset The Reset button is located on the right side of the product label. There are two ways to reset the Router to its factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration > Factory Defaultsscreen of the Router’s browser-based utility.

What can I do with a Linksys router?

The Router lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use the Router to share resources such as computers, printers and files. A variety of security features help to protect your data and your privacy while you are online.

How to use Wifi Protected Setup on a router?

To use Wi-Fi Protected Setup, run the Setup Wizard, or refer to Wi-Fi Protected Setup, page 11. Wi-Fi Protected Setup LED (Blue/ Amber) The LED lights up blue when wireless security is enabled. It flashes blue for two minutes during Wi-Fi Protected Setup.

How do I reset my Linksys E2500 password?

Here’s how:

1. Make sure the router is plugged in and powered on.
2. Physically turn the E2500 over so you have full access to the bottom side.
3. Using a small, sharp object such as a straightened paperclip, press and hold the Reset button for 10 seconds.
4. Unplug the power cable for 10 to 15 seconds and then plug it back in.

What is Linksys default username and password?

admin
The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.

Does Linksys E2500 have WPS button?

USB port is used to share disk storage with other users on your network or on the Internet. The USB port is ONLY available to Linksys E2500 v3. Wi-Fi Protected Setup™ (WPS) button is used to automatically configure wireless security for your wireless network(s). To learn more about WPS, click here.

How fast is Linksys E2500?

300 Mbps
The Linksys E2500 offers fast speed to connect your computers, wireless printers, game consoles, and other Wi-Fi devices at transfer rates up to 300 + 300 Mbps speed for an optimal home network experience.

What is the Linksys WIFI password?

The default password for Linksys routers is admin. For optimum security, it is recommended to change this password during setup.

What is my Linksys guest password?

In the Guest network name and password section, you will see the Guest network name (SSID) and Guest network password displayed on the page. QUICK TIP: If you would like to change the Guest network name and password, you may click Edit and enter your desired guest password in the Guest network password field.

Does Linksys E2500 have wifi?

The Linksys E2500 N600 Dual-Band Wireless Router is a simultaneous dual-band router that lets you access the Internet through wireless connection or by using its four-port switch. This Wireless-N router comes with the Linksys Connect software that allows you to manage your wireless network easily.

What happens when I press the WLAN button on my router?

This button is the Wi-Fi Protected Setup button. Wi-Fi Protected Setup (WPS) is a simple way to connect to a wireless network without much configuration. With WPS, it will automatically configure a wireless network with a network name (SSID) WPA security key and authentication.

What is the default password for the Linksys E2500 router?

For all versions of the Linksys E2500 N600 router, the default password is admin. As with most passwords, the E2500 router default password is case sensitive . Although some Linksys routers don’t require a default username, the Linksys E2500 router does: It does not use a username. However, the default password is admin.

What’s the default IP address for a Linksys router?

Although some Linksys routers don’t require a default username, the Linksys E2500 router does: It uses the default username of admin. That’s right. It uses admin for both the password and username by default. Like other Linksys routers, 192.168.1.1 is the default IP address used to access the router.

Is the Linksys E2500 N600 a dual band router?

The Linksys E2500 N600 Dual-Band Wireless Router is a simultaneous dual-band Wireless-N router that lets you access the Internet via wired and wireless connection. To learn more, click here. To know how to set up the router, click here.

How do I Reset my Linksys router to factory settings?

Press and hold the Reset button at the bottom of your router for 10 seconds then release. Log in to the router’s web-based setup page then go to Administration > Factory Defaults > Restore Factory Defaults. For more instructions on resetting your device, click here.