What is F14 error code?

What is F14 error code?

The manufacturer has assigned this error or fault code to indicate that the central control unit circuit board (CCU) on-board program chip (EEPROM) is malfunctioning and so the rest of the circuit board is unable to get the data it needs to run the cycle properly. A power glitch can cause this error.

What does F14 mean on my Miele dishwasher?

F14 code Miele Dishwasher. F14 – “level/pressure switch failure.” The level switch monitors the dishwasher’s water pressure during the heating cycle (main wash). Level switch failure can commonly happen from poor circulation, or from the defective level switch, itself.

What does F4 mean on a Whirlpool dishwasher?

F4 (or 4 flashes) – Drainage system. This error indicates that your machine has failed to drain as expected. A blocked or faulty drain pump or hose could be the cause of this fault. If so the pump will need cleaning or replacing.

What does F14 mean on Electrolux oven?

F14 Misconnected keyboard cable. 1) Verify connection between display board and touch panel (2 ribbon cables). Make sure the cables are well. connected at both ends. 2) If the cables are good, replace the touch panel.

What does F14 mean on a Frigidaire oven?

This error keeps appearing when any oven control pads are selected. The oven top works. The problem started after the oven was shifted slightly so that the oven door, upon opening, would not rub against a cabinet drawer face.

How do you reset the error code on a Miele dishwasher?

Press and hold the Program button until the “Intake/Drain” LED lights up. Then briefly press the Program button. To delete the fault code memory, press and hold the Program button until the “Intake/Drain” LED lights up. Then press and hold the Program button until the “SaniWash” LED goes out.

How do you clear the fault code on a Miele dishwasher?

To delete the fault code memory, press and hold the Program button until the “Intake/Drain” LED lights up. Then press and hold the Program button until the “SaniWash” LED goes out. off: No faults stored.

How do I fix E4 error on dishwasher?

Error message E4 in integrated compact dishwasher indicates failure of communication between main PCB with display PCB….Resolution:

1. Make sure that the drain hose is correctly connected.
2. Make sure that the filters in the appliance are clean.
3. Make sure that the kitchen sink drains correctly.

What does F14 mean on a stove?

mis-connected flat cables
The “F14” fault code indicates mis-connected flat cables. Disconnect power and check the flat cable connections at P6 and P12 connections. You likely have a loose connection at one of the flat cables connectors or not connected correctly when you replaced the oven control board.