How do I fix the FH code on my Maytag washer?

How do I fix the FH code on my Maytag washer?

What is an F20 or FH Error Code on my Maytag Front Load Washer? An F20 or FH error code indicates a water supply problem….Removing the Error

1. Unplug the washer or disconnect the power for one minute.
2. Plug in the washer or reconnect the power.
3. Re-select the cycle and press Start.

What does FH mean on washing machine?

An F20 or FH error code indicates a water supply problem. Here are some common issues: Both hot and cold water must be connected and turned on. Water inlet hoses kinked.

What does HF mean on Maytag washer?

Water Inlet Problem
FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.

Why is my Whirlpool washer flashing HF?

Common solutions for: Whirlpool F/H – FH No Water Entering Machine or Pressure Switch Failure. Check fill hoses to washer for kinks or clogged screens at water inlet valve. The manufacturer has assigned this error or fault code to indicate that there is a problem with the amount of water entering the machine.

What does HF mean on a Maytag washer?

FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.

What does H mean Whirlpool dishwasher?

Probably a fault in the heating circuit. When opening and closing the door, the wire from the heater’s power supply broke.

What does FH mean on a Maytag washer?

FH Error Code FH indicates that there is a Water Inlet Problem—no or insufficient water supply. Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.

What are some Maytag washer error codes?

Error Codes on Maytag Washers Sd/Sud. To alert you that there are excess suds in the machine, Maytag’s Bravos line of washers show an “Sd” code, while the Maxima models show an “Sud” code. oL. Maytag’s Bravos washers will display an “oL” error code to indicate that the machine is overloaded. uL. LF/Ld. HC. dL/lid/dU. dEt. F08, E01. F09, E01. F05, E02.

What is the problem with Maytag washer?

Maytag Washer Problems: Common Complaints Users can see mold and mildew easily after washing. Machine seems to have a loud spinning cycle. Leakage The door refuses to lock. The drainage in not properly working.

What does error code F35 mean on Maytag washer?

Maytag 9000 series washer error code f35. The F35 error code indicates a problem in the analog pressure sensor. To clear the error (also, you may see SUD), reset the washer: unplug is and wait for about 30 seconds. Plug it back in, them open and close the door.

What does error code E02 and F06 on Maytag washer mean?

F06 E02 is a communication error because your MCU and your CCU (central control unit). You’ll want to remove the top panel, the control panel, and then the front panel of the washer and make sure the wire connections to the motor control unit below the tub are all secure.