How do I change the ink in my Epson Workforce WF 2630?

How do I change the ink in my Epson Workforce WF 2630?

How do I change the ink cartridges?

1. Turn on your product.
2. Lift up the scanner unit.
3. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.
4. Before opening the new cartridge package, shake it gently four or five times.
5. Remove the cartridge from the package.

Do Epson ink cartridges have a reset button?

Find the Cartridge Reset Button. Some Epson cartridges such as Epson 78 has a reset button for refillable purposes. Turn the ink cartridge to where the microchip can be found. Using the end of a paper clip, press the reset button that can be located above the metal contacts, right in the center.

Why won’t my Epson printer recognize my new ink cartridges?

The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly. Please replace any non-Epson cartridges with Genuine Epson cartridges.

How do you reset Epson ink cartridges?

Press the up or down arrow button to select Setup > Maintenance > Reset Ink Levels. Press one of the Start buttons, then press the OK button. Press the OK button again. Press the right or left arrow button to highlight the ink tank you refilled, and press the OK button to select it.

How do you change ink cartridges in Epson?

Note which cartridges need to be replaced and press the OKbutton, then press the up arrow button. If you are replacing a cartridge before you see a message on the LCD screen, press the up or down arrow button to select Setupand press the OKbutton. Then select Maintenance> Ink Cartridge(s) Replacementand press one of the Startbuttons.

How does ink charge on Epson workforce printer?

The print head moves to its home position and the printer starts charging the ink. When you see a confirmation message on the screen, ink charging is finished. Never turn off the product while the power light is flashing or you will waste ink. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.

How do you remove cartridge from Epson workforce printer?

Lift up the scanner unit. Do not move the print head by hand; otherwise, you may damage your product. Do not touch the flat white cable inside the printer. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Note: Dispose of used cartridges carefully.

Where do I go to replace ink cartridge?

If you are replacing a cartridge before you see a message on the LCD screen, press the up or down arrow button to select Setupand press the OKbutton. Then select Maintenance> Ink Cartridge(s) Replacementand press one of the Startbuttons.