How do you wrap an outside tree with string lights?

How do you wrap an outside tree with string lights?

1. Create a ball of lights to make wrapping easier, connect the male plug to a power source at the base of the tree.
2. Pass the ball of lights around the tree trunk, leaving space to wrap back down if desired.
3. Pass the ball of lights around the tree trunk, leaving space to wrap back down if desired.

How do you put lights on a tall outdoor tree?

For especially tall trees, grab a ladder and a friend to help. Wrap the light string into a ball and begin unraveling as you move up the trunk. Be sure the prongs that you need to plug in are on the bottom. Plug another string of lights into the first, secure both with electrical tape and start wrapping the branches.

When stringing lights on a tree Do you start at the top or bottom?

Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.

How do you attach string lights to a tree trunk?

The best way to hang outdoor string lights depends on where you are hanging them. If you have trees, it’s easy to hang lights. Just drill a hole into a tree, install a cup hook, wrap the light around it and secure it with a zip tie. Or you can thread them through the branches and not anchor them.

How do you fasten outdoor string lights?

Most commercial-grade patio lights come with clips attached to the top of the bulb socket or the wire above the bulb. If you used a mounting wire, clip the lights onto the wire. Once all lights are up, once again plug the string lights into the exterior outlet or extension cord plugged into an outlet.

How many lights does it take to wrap a tree?

How many strands do I need? A good rule of thumb is 100 lights for every 1.5 feet of tree. However, if you love lights, you may want to double, or even triple, that amount.

How many feet of light do you need to wrap an outdoor tree?

Use this equation to learn how to wrap a tree with lights: 4’H trunk / 3″ spacing = 16 x 2′ circumference = 32′ of lighting. 3’L branch / 3″ spacing = 12 x 6″ circumference = 6′ of lighting per branch. Total lighted feet will be approximately 56′ for the trunk and four branches.

Do Christmas lights hurt trees?

Are Christmas Tree Lights Dangerous for Trees? As long as you’re using lights designed for outdoor use, Christmas tree lights are safe for evergreens and many hardwoods. Hardy, winter-loving plants can take weight, light and a little heat from light strands.

Do you decorate a tree from the top or bottom?

And you shouldn’t start stringing the lights from the bottom, either. Instead, Bilotto says we should start at the top of the tree using the last light on the strand (the one that doesn’t have the plug beside it) and work our way down the front in a vertical line, leaving three to four inches between each strand.

How many lights do you need for a 6ft tree?

For a basic look our number one rule is at least 100 bulbs per 1ft of tree – so that would mean a 6ft tree needs a minimum of 600 LEDs. For a fuller look, you can add as many lights as you want but we recommend upwards of 700 for a 6ft tree.

How do you hang string lights without holes?

Using Hooks If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

Can you hang string lights on a tree?

To hang outdoor string lights on a tree, you have a couple of options. If you are just looking to weave some lights through the branches and the tree trunk, there’s no need to drill any holes into the tree. You can also hang string lights this way on fences, bushes, or your deck railing.

How to choose the best outdoor string lights?

1 1) Choose your lighting. When choosing your lighting, consider the following: 2 2) Measure the space for your lights from tree to tree or structure to structure. 3 3) Make a rough sketch of your patio area. 4 4) Decide how you will hang your outdoor string lights. 5 5) Determine where you will attach your string lights.

How big of a pole do I need to hang string lights?

To power the outdoor lights, you may need to use an extension cord. 2×2 and 2×4 wood are too flimsy to support hanging lights, especially for large patios or pavilions. Instead, use a 4×4 or 6×6 piece. The more lights you run, the larger your pole needs to be to provide adequate support.

What’s the best way to fasten string lights?

Starting with the string light closest to your power supply, use a staple gun to fasten the lights under your railing. This will keep staples out of sight while holding your string lights firmly in place. Be safe, and do not let the staples puncture the strings. Continue this process, adding staples near each light.