How do I fix code P0420?

How do I fix code P0420?

What repairs can fix the P0420 code?

1. Replace muffler or repair leaks in the muffler.
2. Replace exhaust manifold or repair leaks in the exhaust manifold.
3. Replace exhaust pipe or repair exhaust pipe leaks.
4. Replace catalytic converter (most common)
5. Replace engine coolant temperature sensor.
6. Replace front or rear oxygen sensor.

How do I know if I have an o2 sensor or a catalytic converter?

Background on Oxygen Sensors There’s one sensor right ahead of the catalytic converter. Oxygen sensors are only a part of a greater system, meaning if the p0420 code (or p0141, or p0135) is thrown, that doesn’t necessarily indicate the oxygen sensors need replacement.

Does Cataclean really work?

Normally you’d use Cataclean on older cars, or motors that are having emissions issues passing their MOT’s. Going by the 79% of 4/5 star reviews on Amazon on the whole it works, the only negative feedback seems to come from extreme circumstances, or when users haven’t read the instructions properly.

Can bad muffler cause P0420?

An exhaust leak can definately cause P0420. It’s letting extra oxygen into the exhaust stream. There are pressure pulses AND suction pulses that suck air in through that leak. The converter won’t work right unless the exhaust has just the right amount of oxygen content (very little).

What to do if your Dodge has a P0420 code?

If any other codes are present, they should be addressed first. Scan your Dodge to verify P0420 is the only code present. If other codes are present, they must be addressed first. Examine the exhaust system for damage and leaks. Pay close attention to the exhaust manifold, gaskets, and exhaust pipes pre-catalytic converter.

What does P0420 mean on a catalytic converter?

As the code description implies the P0420 code means that the vehicle’s control module has detected that the three-way catalytic converter is not working properly (is not as efficient as the factory is expecting).

What is the O2 voltage reading on a Dodge Charger?

With the Dodge running and at normal operating temperature, use the digital multimeter to check the voltage reading of the downstream O2 sensor. The downstream O2 sensor produces a relatively steady voltage reading of approximately 0.45V if the catalytic converter is functioning properly.