How much oil does a 2006 BMW Z4 take?

How much oil does a 2006 BMW Z4 take?

Capacity: 6.9 quarts. (with filter)After refill check oil level.

What kind of oil does a 2006 Z4 take?

Motor oil Helix Ultra ECT 5W-30 fully complies with the specification for the Z4 Roadster 3.0si, -Coupe (N52, E86) (Z4 Series) (P) (2006-2008) and is the ideal lubricant for this car BMW.

What kind of oil does a BMW Z4 take?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals. Pento HP can be used in all gasoline and diesel engines containing turbochargers as well as non-turbocharged vehicles requiring 5W-30.

How much oil does a BMW Z4 take?

Engine Oil

Viscosity: 5W-30, 0W-30 (All TEMPS)
Capacity: 6.9 quarts. (with filter)After refill check oil level.
Torque: M12x1.5 – 19 ft/lbs (Oil Drain Plug) M22x1.5 – 45 ft/lbs (Oil Drain Plug) M18x1.5 – 26 ft/lbs (Oil Drain Plug)

How much oil does a 2005 BMW z4 take?

What brand of oil does BMW use?

The BMW branded lubricant formulations are based on Castrol EDGE, a leading full synthetic brand strengthened by Fluid Titanium Technology which increases film strength, reduces friction, and improves lubrication under the intense pressure of high output engines.

What oil does a 2005 BMW Z4 take?

Engine Oil

Viscosity: 5W-30, 0W-30 (All TEMPS)
Capacity: 6.9 quarts. (with filter)After refill check oil level.
Torque: M18x1.5 – 26 ft/lbs (Oil Drain Plug) M22x1.5 – 45 ft/lbs (Oil Drain Plug) M12x1.5 – 19 ft/lbs (Oil Drain Plug)

What engine oil does BMW use?

Most BMW engine comes with a 5W-30 from the factory. BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.

How much oil does 2007 BMW z4 take?

5.8 quarts. (with filter)To check the oil level, the engine must be at full operating temperature,let the engine idle for at least 15 seconds. Turn off engine. Wait at least 1 minute for oil to drain into sump Check the level using the dipstick.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top