Is GY6 35 the same as G4?

Is GY6 35 the same as G4?

What about the bulb base type? Above are two nearly identical bulbs – the G4 and GY6. 35. Both of these bulbs have the same voltage, wattage, color temperature, and a similar-looking base.

Are G6 35 and GY6 35 interchangeable?

Though G6. 35 and GY6. 35 bases have the same spacing, the pins have slightly different diameters. 35 pins are 1.25 millimeters in diameter.

What is a GY6 35 base?

Under the IEC code system, G6. 35 represents a bi-pin base with a 6.35mm pin spread and 1.0mm-diameter pins. A GY6. 35 base code represents a bi-pin base with a 6.35mm pin spread and a 1.25mm-diameter pin.

What is the difference between a G8 and T4 bulb?

Answer: T4 is bulb size i.e. length and maybe diameter- 1.77″long (44.95mm). G8 is the base dimension – it has two pins, 1mm in diameter, and about 13mm or 13.5mm long (very close to 1/2 inch) and 8mm apart. A T4 bulb may or MAY NOT HAVE a G8 base.

Can you replace G4 halogen bulbs with LED?

While replacing 12v halogen lights with G4 LED 12v, it is important to check the compatibility of the G4 LED lights with the lighting fixtures. As mentioned before, most of the G4 LEDs operate on DC voltage, so they will need a different power supply or transformer to operate.

What is the difference between T3 and G4 bulbs?

“12 volt Bi-Pin Halogen Peanut Bulb in the 5, 10 or 20 watt T3 size have the G4 bi-pin base where as the 35, 50, 75, 100 watt T4 size have the GY6. So, “T” is for Tubular, (but they can also be referred to as the ‘peanut bulb’) and 4 is the diameter.

How do I know if my bulb is LED or halogen?

If you are lucky the bulb will say halogen or LED, but this is not a legal requirement, just good practice. If it does not, it must display the power in the form of wattage. Generally anything over 10W will most likely be halogen (25W, 50W etc) and anything under 10W would be LED.

Are G8 and GY8 6 the same?

The difference between G8 and GY8 bulbs is the pin length. G8 Bulbs – pin length is 8 mm, where the GY8 pin is 8.5mm. The pin thickness is the same as 1 mm for both G8 and GY8 bulbs. For most applications, the pin length will not make a difference and you can use either G8 or GY8 bulb.

What does T4 mean in halogen bulbs?

A: The “T” in T3 or T4 type halogen bulbs refers to the tubular shape, (not base) while the number refers to the diameter of the bulb. So, “T” is for Tubular, (but they can also be referred to as the ‘peanut bu… see more.

Can I use a 12v halogen transformer for LED lights?

Fortunately, upgrading Halogen MR16 light bulbs to LED is usually a painless affair, as most LED light bulbs are now designed to retrofit to existing light fittings. All you have to do to swap your old light bulbs out is remove them from the light fixture and fit the new, shiny light bulbs in their place.

Can I put LED bulbs in halogen fittings?

Installing LEDs in halogen fittings can cause a few problems with your new lights. To get the maximum benefit from your new LED downlights, have an electrician check your circuits and fittings to ensure they are compatible with the lower-wattage LEDs.