How do you reset the toner on a Brother HL 5470DW?

How do you reset the toner on a Brother HL 5470DW?

HL-5470DW

1. Turn the printer off.
2. Open the front cover of the printer (as if you were replacing the toner).
3. Press and hold the Go button down while turning the printer on.
4. The Toner light should remain solid at this point.
5. Press the Go button two times.

How do I bypass toner low on Brother printer?

A simple trick on many Brother printers showing a “low toner” warning is to simply pop the cartridge out of the printer, wait a moment, and push it back in. This resets the printer memory and tells the machine to “look again” at toner levels. This can allow you to get more out of your Brother toner cartridge.

How do I reset my brother toner counter?

Reset process

1. Switch-off the printer.
2. Open the front cover.
3. Press and Hold the Go button while all the LEDs on the printer’s control panel light-on.
4. Release the Go button.
5. Press Go twice.
6. Press Go 6 times if you want to reset Brother TN-2110 toner cartridge.

How do I ignore replace toner on my Brother printer?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

How do I reset my Brother laser printer?

Use the following steps to reset the machine:

1. Unplug the interface cable if selecting Network or All Settings.
2. Press Menu.
3. Press the UP OR DOWN ARROW key to choose Initial Setup.
4. Press the UP OR DOWN ARROW key to choose Reset.
5. Press the UP OR DOWN ARROW key to choose the reset function you want to use.

How do I force my printer to print with low toner?

How I Forced My Printer To Print in Low Ink

1. What you need to do is remove the ink cartridge/s.
2. Look for the clear part of the cartridge. ( Usually found near the nozzle.
3. Once you located the transparent side of the cartridge, cut a strip of tape. Then cover the mentioned part of the ink cartridge.
4. That’s it!

How do I reset my Brother printer HL?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

How do I factory reset my Brother printer?

Press the Up arrow key select Reset.

1. Press the Settings button.
2. Press All Settings.
3. Press Initial Setup.
4. Press Reset.
5. Press All Settings or Factory Reset (depends on which model you have).
6. Press Yes.
7. Press Yes again and hold for two seconds.

How do I fix the toner error on my Brother printer?

1. Open the front cover of the printer.
2. Press the Clear / Back button.
3. Press the * button.
4. Press the 0 button.
5. Press the 0 button.
6. Close the front cover.
7. This will clear the ‘Toner Low’ error and allow for continuous printing.

What to do if brother toner counter does not reset?

When you install a Brother TN3290 cartridge in your HL5340D – HL5350DN – HL5370DW – HL5380DN and the toner counter doesn’t reset, you may wish to try the following counter reset procedure. Open the front cover and leave open while completing the following steps. Turn the printer off. Hold the GO button while turning the printer on.

How many toner cartridges does a brother hl-5470dw drum need?

For the sake of reference, a TN-720 toner cartridge should provide approximately 3,000 pages, which means that an HL-5470DW drum should last through 10 toner replacements.

How do you reset the toner on a printer?

Hold the GO button while turning the printer on. When 3 led light up release the GO button. Press the ‘go’ button twice (3 LED’s should light up again). Press the ‘go’ button 6 more times. Close the cover. Your toner is now reset.