Did a 1969 Mustang come with a 351 Cleveland?
The Mustang first offered a 351-cubic-inch small-block V-8 in 1969. Known as the 351 Windsor—for Ford’s Windsor, Ontario, engine plant—it was more than a longer-stroke version of the 302, using a different block and firing order.
How much horsepower does a 1969 Mustang Mach 1 have?
1969 Ford Mustang Mach 1 Specifications for 5.8-liter Windsor V8
| Power | 250 horsepower at 4,600 rpm |
|---|---|
| Torque | 355 pound-feet at 2,600 rpm |
| Top Speed | 128 mph |
| 0-62 mph | 8 seconds |
| Weight | 3,254 pounds |
Is a 351 Cleveland considered a big block?
The 351C used the “Small Block” bellhousing bolt pattern. The 351M/400 used the “Big Block” bellhousing bolt pattern.
What is the difference between a 351 Cleveland and a 351 Cobra Jet?
1970: Meet the 351 Cleveland Bore and stroke were the same on the 351W and 351C, though the block was completely different. A quick way to tell the two apart is that the 351C has the water pump housing cast into the block, while the 351W block is flat at the front.
What was the fastest 69 Mustang?
The 1969 Ford Mustang Mach 1 Cobra Jet was reportedly one of the world’s fastest cars at the time. Paired with an automatic transmission, the Mach 1 Cobra Jet could take to 60 mph from a standstill in just 5.5 seconds. It reached a full quarter-mile in 13.9 seconds at 103 mph.
Where did the 351 Cleveland Engine come from?
However, it was a placeholder in the Mustang while Ford meanwhile finished prepping a more performance-oriented engine family, known by the internal code “335.” This would become the 351 Cleveland, named for where it was produced: Ford Engine Plant Number 2 in Cleveland.
What was the horsepower of the 1971 Boss 351?
The 351C H-code and M-code engines carried over to the larger, redesigned 1971 Mustang, although the M-code’s horsepower was now listed as 285, with slightly lower compression. Two more versions joined the line. The one-year-only Boss 351 was the ultimate factory-built Cleveland, tagged R-code and also identified as “351 H.O.”
When did the Ford Mustang 351 Windsor come out?
The Mustang first offered a 351-cubic-inch small-block V-8 in 1969. Known as the 351 Windsor—for Ford’s Windsor, Ontario, engine plant—it was more than a longer-stroke version of the 302, using a different block and firing order. Offered in two- and four-barrel carburetor versions, the Windsor was a solid performer.
What’s the difference between a 351M and 351C engine?
Codes 4M, 4MA, or 4MAB indicates a 351C or 351M crankshaft with a 1.750-inch throw or 3.500-inch stroke. A 351C crankshaft has a 2.750-inch main journal, which makes it a different crank than you find in the 351M, which has the 400’s larger 3.000-inch main journal.