What is a 638 block?

What is a 638 block?

the 638 was an 87-95 HD 350 block and the 880 was the 95-2000 block used with Vortec 350’s and ZZ4 engines. Aloicious. Post by Aloicious » Sun Aug 23, 2009 5:27 am.

Where are SBC casting numbers?

Where Are Chevy Small Block Casting Numbers Located? On a small block Chevrolet, the casting number is found at the rear of the block on the driver’s side (as is with Chevy’s big block engines).

Is a GM 5.7 a 350?

The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370.

How do you tell if it’s a 383 stroker?

A 383 stroker is a 350 block with a 400 crankshaft. Check the casting numbers on the block to verify it to be a 350. Check the harmonic balancer as it is not solid but machined to to balance the rotating assembly. also the fly wheel or flex plate will have a larger weight on it than the other small blocks.

What is a 632 engine?

GM’s 1,000 hp 632 cubic-inch crate engine is its largest and most powerful ever. As its somewhat unwieldy name suggests, the 632-cubic-inch crate engine produces a whopping 1,004 naturally aspirated horsepower. It also makes 876 pound-feet of torque, and it does both on 93-octane pump gas.

Where are the numbers on a 350 block?

Look at the rear of the engine block for casting numbers, by where the transmission mounts to the engine. There will be at least one set of numbers on the block. If you need to clean up the block to read the number, use the wire brush in combination with the degreaser.

How can you tell a 350 small block?

How to Identify a Chevy 350 Motor

  1. Look at the rear of the engine block for casting numbers, by where the transmission mounts to the engine.
  2. Write down that number, and go to MorTec.com.
  3. Look for a second casting number on the rear of the block.
  4. Look at the front of the block, just forward of the valve covers.

Does Chevy still make a 5.7 engine?

The 5.7L LS1 V8 engine was produced by General Motors for use in high-performance vehicles such as the Chevrolet Camaro and Corvette, among others. It is part of GM’s Gen III Small Block engine family….GM 5.7 Liter V8 Small Block LS1 Engine.

Displacement: 5.7L / 346 cu. in.
Assembly: Saint Catherines, Ontario, Canada

Where is the number on a GM 5.7lg SGI?

This number is on the right rear of the engine. On the left side is GM 5.7LG SGI . I can’t seem to find out any information on this engine and would appreciate any help.

What was the size of the Chevy engine block?

Although all of Chevrolet’s siblings of the period (Buick, Cadillac, Oldsmobile, and Pontiac) designed their own V8s, it was the Chevrolet 350 cu in (5.7 L) small-block that became the GM corporate standard. Over the years, every American General Motors division, except Saturn, used it and its descendants in their vehicles.

Where are the casting numbers on a SBC block?

SBC Block Casting Numbers The block casting number on smallblock and big block Chevy V-8 motors is located on a ledge found at the rear of the block, most often on the driver’s side. This ledge is below the deck of the block and the ledge forms the mating surface between the block and the transmission bellhousing.

What are the casting numbers for a Chevy engine?

Here is a list of casting numbers, along with their original applications. 10036033 Small Block V8 350, 4-bolt, Goodwrench crate engine, 2-piece rear seal 10051182 Small Block V8 2 bolt, Bow Tie block, 3.75-4.30 bore, 1-piece rear seal 10051184 Small Block V8 4 bolt, Bow Tie, 4.00-4.160 bore, 1-piece rear seal

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top