How long is the W58 transmission?
MKIV W58: 31 5/8″ from bellhousing to the end of the shifter mech housing.
How much horsepower can a W58 transmission handle?
I dont know why you started yet another thread about the w58. You said you aleady searched and found the answers. 450whp is about the max… slightly over depending on driving style.
Are all W58 transmissions the same?
AFAIK, if it’s a “W58”, they’re all identical externally. The only differences are the gear ratios inside the box.
What is the difference between W58 and r154?
w58–cheaper, almost straight bolt-on, better shifting, can’t handle as much power, lower 5th ratio than w55 (so better mpg?) r154–more expensive, doesn’t shift as smoothly, requires more modification, slightly lower 5th gear ration than r154 (so better mpg?)
How do I know if I have a W58?
The only obvious way is that the W58 will have significantly longer gearing than the W55. They shift and feel completely the same so that is not a good indicator either. If you take the tranny out, the other obvious indicator is a shorter input shaft by about 1/2″ unless they swapped that as well.
Will a W58 fit a 2JZ?
The 2jz block mates to the w58 the same exact way it mates to the v160, remember that the blocks in both the TT and NA cars are identical (i know i know, no oil squirters, ect, but the block is the same) so the 2 trannies are interchangeable.
What did the W58 come in?
It came in two varieties: the original found in the 1982–1989 non-turbo Supras, Celicas and Cressidas of the early 1980s; and the later version found in Mk3, Mk 4 Supras and Lexus SC 300s.
How much power can a supra 5 speed handle?
It will cope with 3-400 rwhp well but over 400 3rd gear will let go after a while.
What does a W58 transmission come in?
It came in two varieties: the original found in the 1982–1989 non-turbo Supras, Celicas and Cressidas of the early 1980s; and the later version found in Mk3, Mk 4 Supras and Lexus SC 300s. Here is the exact list: 1982-1986 Toyota MK 2 Celica Supra.
Will a w58 fit a 2jz?
How do I know if I have w58?
if there are no access panels on it, it is a w58. you can also tell by the slave cylinder. the slave cylinder you have pictured, is a w58 slave cylinder, the bleeder screw is at a 90* to the inlet hose.
What’s the torque limit on a W58 transmission?
The W55, W56, W57, W58, and W59 are very similar aside from the gear ratios. W58 hp limit is about 350whp. Hpisn’t the issue though, it’s the torque. How can you tell r154 from w58?
What kind of gear ratios does a Toyota W58 have?
W58 W58 alloy center plate 1982-1989 non-turbo supra/celica/cressida. W58 steel center plate 89+ MK3/MK4 supra, SC300. This version is considered stronger due to wider bearings and gears, different gear selection mechanism. Built by AISIN. W58 gear ratios: 1 – 3.285:1 2 – 1.894:1 3 – 1.275:1 4 – 1.
What’s the horsepower of a jeep W58 transmission?
Physically, these transmissions have much in common (like the bell housing-to-body bolt pattern) with other Aisin-built transmissions, like the Jeep AX-5 and the Toyota G-series. The W55, W56, W57, W58, and W59 are very similar aside from the gear ratios. W58 hp limit is about 350whp. Hpisn’t the issue though, it’s the torque.
Is there a steel plate version of the W58 transmission?
In theory, the all-alloy version of the W58 should be the exact same strength as any other all-alloy W-Series transmission. The steel plate version is considered much harder to find and worth approximately three to five times as much as an all-alloy version.