What does EO 11 mean on Bosch oven?
When your Bosch oven keeps showing E011 error code this indicates a button has been held down for too long. Or has jammed. If the main oven performs perfectly on its own but Bosch oven error code E011 is displayed when the grill door is open and the grill is switched on this points to the main oven control failing.
Why is my Bosch oven not working?
If your Bosch oven not heating properly results in longer cooking times or underdone food it’s possible the oven thermostat needs recalibrating. If recalibrating doesn’t fix your Bosch oven not heating up, there’s a small chance your oven thermostat is faulty and requires replacement.
Why does my Bosch oven beep when I open the door?
When the oven beeps, it is to alert the user that the food is complete. Some models will continue to beep as a reminder to take the food out of the oven. Convection ovens also sometimes include a temperature gauge that will cause the oven to beep when it’s at 75% of the original cooking time.
What does E305 mean on a Bosch oven?
There is no connection
E305 — There is no connection between the baseplates.
What does E3 mean on Bosch microwave?
E3 error code: Incorrect resistance in jumper circuit.
How do you reset a Bosch oven?
Reset the oven by turning it off at the breaker. Wait 30 minutes, then turn the breaker on. The oven should return to normal. However, if the error code appears again, please take note of it and call Bosch Customer Support at 1-800-944-2904.
How do I get my Bosch oven alarm to stop beeping?
Make sure the oven vents are clear and unblocked. These vents release hot air. It’s normal to see hot air or steam escaping from these vents. If you see an “E” with a number on the display (ex: E30), press any key to stop the beeping.
How do I unlock my Bosch microwave?
If your control panel is locked, there is a red key symbol to the right of the display (middle of the 3 buttons on the right side). Just press and hold this for 5 seconds and that should unlock your control panel.
How do I fix my Bosch E305 oven?
E305 — There is no connection between the baseplates To eliminate the issue, switch off the device and then turn it on after some time.
What does E05 mean on Bosch oven?
The Bosch error code E05 indicates a fault with the temperature sensor at the evaporator fins. The evaporator fins are thin pieces of metal which bring the air closer to the coils so that heat can be transferred to the water.
How do you reset a Bosch microwave?
Unplug the microwave from the power supply, wait 10 seconds, then plug it back into the power supply, if the microwave is not operating properly or the power goes off before the desired cooking process has completed.
Where do I find the error code on my Bosch oven?
The error will be shown on the oven display. Each problem has its own code. An owner may see the error number and find the error number in the manual. Neither the owner nor a technician has to spend time searching for a problem.
What does E115 mean on a Bosch oven?
The E115 error means that temperature inside the oven is too high. It is easy to fix this issue. The oven needs time to cool down and come back to the correct work. Also, remove all the racks out of the oven.
What to do when your Bosch oven says Er3?
As an oven cools down, the Er3 error will indicate a problem no more and an oven is ready to work. Try to turn off the mode switch. It is allowed to use the oven when the problem occurred. But if it did not work, the door lock mechanism will be replaced by a technician. Push the Stop bottom until Er8 stops lighting.
Why does my Bosch oven keep saying F31?
The Bosch oven is connected with the microwave oven. In such a case, keep the oven off the power supply for one minute. Then try to switch it on. If the problem remains, call for a technician. The number of reasons may cause F31 error.