How do you set up a Dynojet Power Commander 3?

How do you set up a Dynojet Power Commander 3?

With the ignition off, hold down all three buttons on the Power Commander III unit. While still holding down the buttons, turn on the ignition and start the bike. Release the buttons. The light(s) should show up in the last place they were left, by default the center two lights.

How much horsepower will a power commander add?

The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.

How do I connect my power commander 3 to my computer?

Hassle free USB communication The Power Commander USB will instantly and automatically connect to the Power Commander Control Center software once it is installed. Simply “power up” the unit and connect the supplied USB cable to the computer and PCIII USB.

What does the Dynojet Power Commander 3 do?

The Power Commander 3 USB provides precise information for fine-tuning fuel-injected motorcycle with upgraded air filters, aftermarket exhaust systems or engine modifications. Each unit includes a built-in microprocessor and a base map designed to improve engine performance over stock.

What is a Dynojet Power Commander 3?

The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The Power Commander III USB allows a full range of fuel adjustment, as much as +/- 100% over stock.

How do I connect my power commander?

How to… fit a power commander

1. Position the commander. Find somewhere protected from rain and engine heat to mount the power commander.
2. Connect to the battery. The power commander has one black 12v connector, which goes onto the black negative battery terminal.
3. Connect to the injectors.
4. Check and start the bike.

What’s the difference between Power Commander 3 and 5?

What’s the difference between a Power Commander III and V They do exactly the same job but the 5 is about half the size of the PC3. However, both maintain, customise and tune your bike’s air to fuel ratio. It is easier to connect a secondary fuel module and a quick-shifter with a Power Commander V.

What is a power Commander 3 USB?

Dynojet Power Commander 3 USB. The Power Commander 3 USB provides precise information for fine-tuning fuel-injected motorcycle with upgraded air filters, aftermarket exhaust systems or engine modifications. Each unit includes a built-in microprocessor and a base map designed to improve engine performance over stock.

What is a power Commander 3?

Power Commander is considered a “race-only” line, which means that most of its users are bikers who drive competitively. Power Commander manufactures a III line that is nearly as powerful as the PC but can be used by bikes you would find on the street, like Harley-Davidson and Dyna.

What does a power commander do for a motorcycle?

What Is A Power Commander. A Power Commander is a brand of fuel injection or ignition timing manufactured by Dynojet Research Inc. The Power Commander is used by motorcycles as a way of boosting their engine performance to a higher level of horsepower than a rider might get from the motorcycle’s stock engine performance.