How far apart should post and rail fencing be?
1.8m
The structure of post and rail fencing is the same for all types of timber, unless otherwise stated, all posts should be set at 1.8m centres, rail spacing will vary depending on the number of rails used. All nails to be 100mm x 4mm and galvanised.
What is the standard size of a fence post?
Fence posts dimensions Pressure treated pine or cedar post for fences normally have 4” x 4” or 6” x 6” nominal dimensions and sold 6′ or 8′ long. Vinyl posts normally 4” x 4”, 5” x 5” and 6” x 6” and length vary from 72” to 102”.
What size should fence rails be?
The most common size for rails is 2” x 3” or 2” x 4”. Maximum post spacing is 8′ between posts; thus, a 2″ x 4″ x 8′ rail would be used. If you are doing an 8′ tall fence, we recommend using a 2″ x 4″ x 12′ rail and setting your posts on 6′ centers.
What is the maximum distance between fence posts?
8 to 12 feet
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Can fence posts be 10 feet apart?
Can fence posts be 10 feet apart? Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
How far apart should fence posts be UK?
Fence posts should be 60cm deep in the ground and spaced 1.8m apart.
How close to property line can I build a fence?
Check Rules and Regulations Typically, fences are installed anywhere from 2 to 8 inches from a property line in most areas. In cases when a fence is built directly on the property line, the responsibility may be shared between you and your neighbor.
How tall should a fence be for a 6 foot fence?
2 feet
As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.
Is cement required for fence posts?
Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
How tall should post and rail fence be?
Trim the tops of the posts to the desired height of the fence. Mark the posts for bottom rails that are 3 to 4 inches above the ground and top rails flush with the top of the posts.
What are the different types of post and rail fencing?
Post and rail fencing has four main componentry types: Post and rail fencing is constructed either with morticed fence posts with fence rails simply slotted into the mortices, or with solid fence posts with fence rails nailed onto the posts. This method of fence construction makes it ideal for a run of fencing where the ground is sloping or uneven.
What do I need to make knee rail fencing?
The construction of knee rail fencing is very simple. Short square posts have a ‘birdsmouth’ or V-shaped notch cut into the top to enable a square top rail to sit at an angle. The top rail is fixed to the post with a metal knee rail post strap, which is nailed on to the post to secure.
How big of a hole do I need for a rail fence?
It is advisable to use a Guage cut to size of the post to post spacing, this is done by subtracting the width of the post to the post spacing. 2410 – 127 = 2283mm The Guage can be made up using either an offcut of PVC rail or a length of timber. Auger holes at correct spacing. Recommended hole size 300mm wide x 650mm deep.