Is refinishing a guitar worth it?

Is refinishing a guitar worth it?

Is refinishing always a good idea? Although there are good reasons to refinish a guitar, there are also reasons not to. However battered a guitar is, it’s value will be affected by any finish work carried out. In general, valuable vintage guitars should never be refinished unless they have no original finish left.

How difficult is it to refinish a guitar?

It’s not too difficult to refinish a guitar. More than anything, it’s a matter of patience. Taking the time to properly prep the wood and allow appropriate cure times can yield excellent results, even for the first-timer. A guitar with a thin nitro finish will resonate better than one with a hard poly.

What do I need to refinish a guitar?

How to Repaint or Restain, or Refinish a Guitar

1. Begin to disassemble your guitar.
2. Take the neck off of your guitar.
3. Remove the hardware from your guitar.
4. Consider Removing your Guitar Bridge Studs.
5. Organize your hardware.
6. Remove the Old Guitar Finish by Sanding.
7. Use an orbital sander.

How much does guitar refinishing cost?

The starting cost of a guitar refinish is about $200 for the body while a professional custom paint job can cost $600 or even more. Paint and other material will only cost you around $50 to $60, it’s the labor that’s expensive. You can do it on your own, but the process will take a lot of time and patience.

Can you spray paint a guitar without taking it apart?

So yes, you can paint a guitar without removing the electronics. The wires are usually long enough to lift the electronics outside of the body to get them out of the way. Now if you want a good finish, you need to remove them.

What kind of oil do you use for a guitar body?

“There are any number of light, natural oils that you could use: olive oil, peanut oil, canola or walnut oil… A small amount is applied with a soft cloth, allowed to sit for a few minutes and then all excess is rubbed off.

How can I repaint a guitar?

How to Repaint a Guitar Method 1 of 3: Disassemble the Guitar. Remove the guitar’s strings. You can clip the strings away using your usual pair of string clippers. Method 2 of 3: Sand the Existing Finish. You have two options. Method 3 of 3: Apply the New Finish. Be sure to paint in a dust-free environment.

How do I finish a guitar?

Use a wooden dowel wrapped in sandpaper to get the majority of the old finish off in hard-to-reach places, such as the curve of the horn on a guitar. Then use sand sponges to finish the job. When you’ve removed all of the old finish, go over the guitar and make sure there are no uneven spots.

Can a guitar be refinished?

Frequently you’ll see a guitar labeled as “refinished” or as a “refin” which means that it was repainted at some point in its lifetime. Refins vary a bit as well, with some representing a professional, delicate undertaking and others being little more than garage spray paint jobs.