Can you supercharge a Acura TSX?
CT Engineering has developed a Supercharger Kit for the Acura TSX that increases power by approximately 50 horsepower at the wheels. The supercharger uses an gEaton-type h design that provides consistent boost and compresses the intake charge efficiently with a minimal increase in the intake air temperature.
Does the Acura TSX have a K24?
The first-generation Acura TSX came only with the Honda K24 four-cylinder engine. Specifically, the engine found in the 2004-2008 Acura TSX is the K24A2. It has a compression ratio of 10.5 to 1 and has a redline of 7,000 rpm. It makes 200 horsepower and 166 lb.
Is CT Engineering still in business?
But, as it sits, CT-Engineering is no more, closing a door to Honda and Acura aftermarket parts with a foundation in racing that started in the late 70’s and took off in the mid 80’s till today.
How much HP can K24A2 handle?
stocks sleeves will hold up to 700hp.
Is K24A2 a VTEC?
The K24A2 has large primary (low-lift) lobes on both the intake and exhaust cams. The TSX exhaust camshaft also has larger secondary (high-lift, VTEC) lobes than the RSX-S or ITR, making it a good nominee for a swap into a naturally aspirated K20A2 engine for those interested in just staying with stock Honda parts.
What happened to comptech?
CT Engineering, the Honda-car aftermarket products company that rose from a split up of renowned racecar engineering company Comptech Motorsport in 2007, has closed it’s doors for good as of September 2018.
What is a CT engineer?
CT scan engineers handle certain types of medical equipment, including installation, testing and servicing.
How much boost can a stock K24 take?
The max flow on a K24 is rated around 37lbs/minute. You can expect about 370 hp at the crank (give or take) when the K24 is pushed to the limit. Of course you can try to push past this limit, but you will hit the point where you run into diminishing returns.
How much power can a K24 make?
Honda K24: Tuning Potential The stock power output for the engine can reach 205 HP. With the addition of a turbocharger that power increases to 400HP+. Other performance parts can increase the engine’s power potential to the upper 200s and even 300 HP.
How much HP can a K24 handle?
What happened to CT Engineering?
What kind of supercharger does a Honda K20 use?
Eaton TVS Supercharger kit with Modular manifold for Honda/Acura K20/24 Engines Boost the power output of your K-Series Honda/Acura engine, while retaining drivability, fuel economy, and reliability with this MercRacing TVS 1320 Supercharger Kit.
What kind of supercharger does Kraftwerks have?
The Kraftworks supercharger is actually a belt driven turbocharger. I can see lines attached to it. Is the gear drive/bearings water cooled? 2. It looks like the power steering pump is long gone. Are you just running manual steering with the stock power steering rack?
What are the Twin Vortices Series superchargers for?
These Twin Vortices Series Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in a patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors.
What is the bypass valve on a Honda supercharger?
Custom size pulleys can be made. Maximizing your efficiency during cruising is the job of the supercharger’s integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to “free-spin” under light engine loads.