Can you put lockers on Dana 35?
Next–Your dana 35 will not be up to a locker. To keep it from grenading or breakign a shaft, I would suggest upgrading your axle shafts as well. With a 30 spline carrier (locker), and 30 spline axle shafts, you would be much better off and safe.
Can you make a Dana 35 strong?
There are two options when upgrading the 35 shafts. Superior Axle & Gear offers its Super 35 kit and Warn has a full-float kit. The Super 35 kit is available for both C-clip and non-C-clip axles. The kit replaces the smallish shafts with 1.31-inch 30-spline pieces that are over 35 percent stronger than stock.
How big of a tire can a Dana 35 handle?
They can and will break at any time, don’t push your luck with tires bigger than 31″. The front can handle 35’s just fine but over that and it needs attention.
How much torque can a Dana 35 handle?
How much torque can a Dana 35 handle?
| Axle Type | Cover Bolts FT. LBS. | Ring Gear Bolts to Cast FT. LBS. |
|---|---|---|
| Dana 30 | 30-40 | 45-60 |
| Dana 35 | 30-40 | 70-89 |
| Dana 44 | 30-40 | 45-60 |
| Dana 60 | 30-40 | 100-120 |
What is a Jeep lunchbox locker?
The lunchbox locker is designed to split power evenly between both wheels regardless of which wheel has traction. This allows the cam gears to spin right past the axle gear which is what creates the ratcheting noise that lunchbox lockers are famous for.
What vehicles have a Dana 35?
The Dana 35 (as well as the AMC-15) is found in a wide variety of vehicles. The most common Dana 35 applications are as a rear axle in the Jeep Cherokee, Jeep Wrangler, and Jeep Comanche and as a front axle in the Ford Explorer and Ford Ranger.
How heavy is a Dana 35?
How heavy is a Dana 35?
| Dana Axles | |
|---|---|
| Model | Weight |
| Dana 35 (Jeep) | 127lbs |
| Dana 44 Front (full sized) | 158lbs |
| Dana 44 Rear (full sized) | 140lbs |
What gear ratio does a Dana 35 have?
Dana 35 3.08-5.13 Ratio.
Can you run 33s on a Dana 35?
A Dana 35 normally holds up ok to 33’s providing there’s no locker and you take it easy on it. Just don’t get into a situation where you get the rear-end bouncing trying to get up/over something. I wheeled my previous TJ fairly hard with 33’s on its original Dana 35 for several years without issue.
Can Dana 35 Handle 35 tires?
Yes, a built Dana 35 with a Super35 kit installed can handle 35s.
Can a Dana 44 handle a v8?
Administrator. 44 or 8.8 are both fine with v8 under 400hp.
How much HP can a Dana 30 take?
Amongst other things. To answer your question the stock supports 250 or 300 if you don’t savage it. Run that rear until it blows, then stick an 8.8 in there.
Where can I get a drop in locker for my Dana 30?
Thus, for around 200-250ish you can get a drop in locker for the front dana 30, lock-rights are fairly decent, which some times you can install yourself,but a for a shop to do it.. ball park 250-300. This will make a major difference in your traction off road.
How many spline axles are in a Dana 35?
Description: Spartan Locker for Dana 35 with 27 spline axles (1.625 Bore is for 93 and older Dana 35’s). The Spartan Locker by USA Standard Gear is a mechanical locker that replaces the spiders in a standard…
Can you get trac loc out of a Dana 35?
If you really want something find someone that might be getting rid of a trac-loc out of a 35. They don’t seem to do much damage to the axle and will help you when you need that extra grip. Mainly with that axle refrain from any wheel hopping on the trail. That’s what will kill it for you.