How do I access the console on my Cisco router?

How do I access the console on my Cisco router?

Access Router Command Line Interface

1. Under Category, choose Session.
2. Under Connection type, choose Serial.
3. In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.
4. Click Open.

Where is the console port on a Cisco switch?

Every Cisco router or a switch has a console port (also known as the management port) on its back side.

What is the console port on a switch?

The console port is used to connect a computer directly to a Gigabit Ethernet switch and manage the switch since there is no display device for the switch. In most cases, it is the very first step to configure your network switch.

How do you use a console port on a switch?

Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.

What is console port and auxiliary port?

The console and auxiliary ports provide access to the router either locally using a console terminal connected to the console port, or remotely using a modem connected to the auxiliary port.

How do I access my router through the console port?

What is console port in router?

Console Port Overview The console port on the router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector. The console port is used to access the router and is located on the front panel of the Route Processor.

What is the difference between console port and management port?

the console port is for serial management. Usually directly to your laptop or via an console server. The management port is a physical port which can be assigned an IP either via DHCP or static for out-of-band management of the switch.

What’s the default COM port on a Cisco switch?

The default COM port is COM1. Step 6. In the Speed (baud) field, enter the digital transmission speed that is compatible with the switch. For 300 and 500 Series Managed Switches, the speed must be set to 115200.

Can a Cisco 200 series managed switch support CLI?

Note: Cisco 200 Series Small Business Managed Switches do not support the CLI. Step 1. Connect the switch to the computer using a standard 9-pin serial cable. The Cisco DB9 to RJ45 Console Cable also supports console connections, but only if the switch has an RJ45 Console port.

Which is the correct console cable for Cisco?

The correct console cable type is DB9 R232 null modem cable which has ‘DB9 female’ connectors at both ends of the cable. Yiu Kay Lee Concentrix at Cisco CISCO | Yiu Kay Lee | SMB Pre-Sales | [email protected]| Phone +1 (855) 354-7776 View solution in original post 5 Helpful Reply 1 REPLY 1 Yiu Kay Lee Cisco Employee Mark as New Bookmark

Can a Cisco DB9 connect to a console?

The Cisco DB9 to RJ45 Console Cable also supports console connections, but only if the switch has an RJ45 Console port. An RJ45 Console port resembles an Ethernet port and is labeled CONSOLE on the back of the switch.