How do I connect my HL printer to WiFi?

How do I connect my HL printer to WiFi?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

How do I make my Brother HL-2270DW discoverable?

Configure the wireless settings:

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

How do I connect my Brother HL-2270DW wirelessly to my Mac?

1. Click Configure Wireless.
2. Choose Infrastructure for Communication Mode.
3. Click the Browse button next to Wireless Network Name (SSID).
4. Choose your network name from the Name (SSID) list and then click OK.
5. Choose your Authentication Method.
6. Choose your Encryption Method.

How do I reset my Brother HL 2270DW wireless?

Brother HL-2270DW – Factory Reset

1. Turn off the printer.
2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
3. Release GO, all the LEDs will turn off.
4. Press GO ten (10) times. The printer will automatically restart.

How do I connect my Brother HL 2270DW to a wireless network Mac?

Is the Brother HL-2270DW wireless?

Wireless Setup for the Brother HL2270DW. The desktop computer does not have a wireless network card, but is connected to my wireless router using an ethernet cable. The next point of clarification is that you will need a USB printer cable for the initial wireless setup of this device.