When would you use a rotor sprinkler?

When would you use a rotor sprinkler?

Rotor Head These heads are generally used for larger landscape areas because they have an average radius of throw between 15 and 50 feet. They have a higher optimal operating pressure between 45 and 50 psi and they have a precipitation rate which is much lower than spray heads because they have a larger area to cover.

What is a rotary sprinkler?

A rotary sprinkler is part of a lawn irrigation system. It consists of one or more rounded heads driven into the lawn using metal spikes. Each head is designed to automatically rotate 360 degrees, spraying water through a series of holes around the sprinkler’s diameter.

Are rotary sprinklers better?

The pros. Generally, rotor heads are the better choice for larger areas of turf. They have a low precipitation rate, so they will evenly cover more area over a longer period of time. This is ideal for sloped areas because it allows more time for water absorption.

Can you mix rotor and spray heads?

Rotory heads have a smaller precipitation rate than spray heads. This is why you NEVER mix rotor & spray heads on the same zone, as doing so will cause to to either over-water or under-water your lawn or landscaping.

Can you mix rotary and spray sprinklers?

Rotor heads, spray heads, matched precipitation etc all throw water at a different rate. Mixing them in the same zone will waste large amounts of water, and create a huge imbalance that causes overwatering and underwatering. Choose the type of sprinkler head you want in that zone, and replace the others.

What is a rotor zone?

They have a constant stream of water between 2 to 20 feet. Using a stream rotor can cover many of the same areas that spray heads do, but at a water distribution rate of a rotor. So utilizing these heads on our rotor zones will help to conserve water and make for a healthy lawn.

Do rotary sprinklers use more water?

But modern, rotary nozzle sprinkler heads can help. “Rotary nozzles spray larger water droplets that are heavier and fall to the ground rather than blowing away if there’s wind,” Tejral said. “They also send out water at a much slower rate, so the ground has more time to absorb it.”

Which is better hunter or Rainbird?

Hunter products are slightly more durable than Rainbird. They can handle a greater PSI which is important when it comes to water pressure, winterization and extreme weather. Sprinkler heads sit in the ground which experience extreme temperatures. Hunter Controllers are way easier to program than Rainbird.

How many sprinkler heads should be on one zone?

At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.

Can you replace a spray head with a rotor head?

A replacement sprinkler head doesn’t have to be the same brand as the broken head. But it does have to be the same type: pop-up (stationary, rotor- or gear-driven rotor) or impact. Buy a replacement head at a home center or online (Sprinkler Warehouse is one source).

How do you adjust rotor sprinkler heads?

Locate the screw on top of the rotor cap. Using a flathead screwdriver, turning the screw left to increase the spray distance or to the right to decrease the spray distance. A 25-percent adjustment is possible. You can perform these adjustments while the water is turned on or off.

How do you adjust a rotating sprinkler head?

Move the sprinkler head by hand to adjust the watering direction. Grip the spray head between two fingers. Then, rotate it by hand so it is aimed at the direction you want the water to spray. For example, if you want the water to spray towards the right, rotate the head to the right.

How do you adjust a hunter rotary sprinkler?

To increase the arc of your Hunter rotor head, you’ll want to insert the plastic key into the adjustment socket, which can be found on the top of each sprinkler head. Turn the adjustment wrench clockwise in a full 360-degree motion. This will increase your arc by 90 degrees each time you turn the wrench a full circle.

What are the types of sprinkler heads?

Traditionally, sprinkler heads have been divided into two primary types: fixed spray heads and rotor heads. Recently, a third subtype was introduced called “rotators” or “rotary heads,” which have been growing in popularity. Below we will explain, in detail, the uses of each type of sprinkler head. Fixed spray heads.