Is stabilus lift an O Mat?
Stabilus offers the LIFT-O-MAT with telescope tube in versions with and without pressure tube lock. In engine hoods, the end position lock provides extra safety because it will hold the hood safely in position during work performed.
How do I know if my stabilus lift is mat?
To find your gas spring, enter the number of your gas spring in “Type”. The number is listed in the red square and consists of six digits or 4 digits and 2 letters. The number to the right is the pressure (here: 900N).
Where do I find the part number on a stabilus LIFT-O-MAT?
On the body of the Stabilus gas strut you will find the part number (product code) in the area marked in BLUE on the image below. The Lift o mat part number will usually consist of 6 numbers, letters or a combination of both depending on the use, followed by the Newton Force.
What is Lift O Mat?
The LIFT-O-MAT gas spring is a hydropneumatic adjustment element consisting of a pressure tube, piston rod with piston, as well as a suitable end fitting. It is filled with nitrogen, which, under constant pressure, acts on piston cross sections of different sizes, creating a force in the extension direction.
How do you unlock stabilus lift mat?
To unlock, the support tube is swivelled back into the central position. The lock of a gas spring with the lock on the inside is comparable with the mechanics of a ball point pen. A light push on the piston rod in the extended position locks it; a quick movement in the extension direction releases the lock.
How do I know what size lift is on my truck?
Look at the front crossmembers for the lower control arms. Measure the distance from a lower control arm bolt to the factory control arm mounting hole above it. If your kit uses blocks in the rear instead of leaf springs, measure the size of the block. The rear of most kits will be 2-3 inches less lift than the front.
How do you measure a gas spring?
The first type of gas springs are springs with welded mesh at either end. With this type of springs, we measure the total length from the centre of one mesh to the middle of the second mesh. The second type of springs are terminated threads.
How do you adjust gas struts?
Using the Allen key provided undo the grub screw until gas can be heard escaping. Then re-tighten the grub screw. Only release the gas in one second bursts to avoid releasing too much gas. Repeat the process until the gas strut is behaving as desired.
What does a lift O Mat line do?
Their Lift-O-Mat line is used for lifting and lowering in a controlled manner. The force of the gas springs makes it possible to easily lift in a safe and user friendly way.
Is the lift O Mat PTL a gas spring?
In the compressed position, the gas spring is held by a locking system which will extend noiselessly upon a gentle push on the gas spring. The LIFT-O-MAT PTL from Stabilus is a gas spring with an additional mechanical lock in the compressed position.
What do you need to know about Stabilus lift O Mat?
Stabilus Lift-O-Mat Stabilus manufactures gas springs for lifting, lowering, moving and adjusting. Their Lift-O-Mat line is used for lifting and lowering in a controlled manner. The force of the gas springs makes it possible to easily lift in a safe and user friendly way.