What does code Le mean on LG dishwasher?

What does code Le mean on LG dishwasher?

MOTOR ERROR
The LE error code on the LG dishwasher display is an indication of a MOTOR ERROR. The 5 issues that may cause this fault code is a wiring problem (most common reason for LE error), the impeller of washing pump is locked, the rotor of washing motor is locked, the blade is locked, or the PCB main control board is faulty.

How do I force drain my LG dishwasher?

Force the Drain. This is activated by pressing and holding 2 buttons simultaneously e.g DELICATE + DUAL CONTROL. The 2 buttons may vary depending on your model. If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off.

How do I clear the LE error on my Samsung dishwasher?

What does LE error code mean and how to remove it? It is a leak error. When it appears on the scoreboard, protection is activated and the equipment stops working. Try rebooting: close the shut-off valve, unplug the machine for 5 – 10 minutes, and then restart it.

How do you clear a dishwasher error code?

Sometimes disconnecting power to the dishwasher for 30 seconds will clear the fault, error or function code.

How do I fix the LE error on my LG dishwasher?

-Turn off the LG Dishwasher for 30 to 45 minutes to let the motor cool down as it may have overheated. -After 30 to 45 minutes start a new wash cycle and check if the LE error code shows again. -If not, resume normal washing.

How do you fix Le error on LG washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

How do I clear the error code on my LG dishwasher?

A small float element is activated when there is water in the sump and sends a signal to the control board. But it happens that the AE error code is associated with a short-term failure. To reset it, unplug the dishwasher for at least 10-15 minutes and turn it back on.

How do I manually drain my LG washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

What does an LC LE error indicate?

Leakage error LC, LE – The dishwasher’s leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off. During this time it will attempt to drain the water away.

What does Error Code Le mean on Samsung washer?

Samsung washing machine error code LE means the washer has tried to fill but has not reached the proper water level. Check the water supply valves are fully opened.

How do I get rid of the error code on my LG dishwasher?

How do I drain my LG front load washer?

Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.