How do I set the time on my Concord Express?

How do I set the time on my Concord Express?

To set the system time:

1. Enter the programming menus by pressing 9 + System Master Code.
2. Press 00. .
3. Enter the correct time in 24-hour format (4 digits), then press # . For example, if the current time is 7:23 a.m., press 0723. + # .
4. Press * + 4 + # to exit the programming menus.

How do I reset my GE Concord alarm?

How To: Reset Installer Code Concord 4

1. unplug alarm from outlet.
2. locate eprom.
3. remove eprom.
4. wait 2 minutes.
5. can verify as keypad will do nothing by trying options.
6. plug prom back in.
7. plug power back in.

How do you clear the alarm memory on a Concord 4?

To begin this process, press the “asterisk” key. While the keypad begins displaying status updates, press the “disarm” button followed by your 4-digit alarm code. This will clear the system memory and prevent the system from displaying the same message again for 4-10 hours.

How do I set the date and time on my Concord 4?

Concord – Set Time and Date

1. Press 9 then enter Master Code, keypad displays SYSTEM MENU then TIME-DATE.
2. Press # then enter Time 0000 to 2359 then press # to save.
3. Press A or B button to move to Date then enter 2-digit Month, Day and Year then #
4. Press * then press A or B button until END PROGRAM then press # to exit.

How do you program on Concord 4?

To enter program mode: Press 8, 4321, 0, 0. The display shows SYSTEM PROGRAMMING.

How do you disarm a GE alarm system?

The first thing you’ll want to do is go to your alarm keypad. If you know the code to disarm the alarm, enter it and see if that stops the beeping sound. If you don’t know the code, look for buttons labeled “clear” or “reset” and press those.

How do I stop my GE alarm from beeping?

Turn off the alarm beeps setting by selecting the menu and going to “Immediate Beeps OFF/ON.” Push the 2 key to turn it off. The display will flash the number 2. Push the # key and the new setting will display on the alarm.

How many user codes can a Concord 4 support?

SuperBus 2000 2-Amp Power Supply (600-1019) Q. How many touchpads can the Concord 4 handle? A. The Concord 4 can handle up to 16 bus devices, which include touchpads, keep in mind the system many require a power supply if multiple touchpads are used.

How do you program a Concord 4?

To enter program mode: Make sure you disarm the system in all partitions. 2. Press 8, 4321, 0, 0. The display shows SYSTEM PROGRAMMING.

How many user codes can the Concord 4 support?