How to reset ALOM password?

How to reset ALOM password?

RE: Lost ALOM Password

1. Attach console to Serial Management Port.
2. Power on the server via the front power button.
3. Boot the system to the OS level.
4. Use the scadm command to reset the admin password:
5. Use the escape sequence “#.” to get system back to the alom login prompt.

How to reset ALOM?

There are two ways to reset ALOM:

1. At the sc> prompt, type the resetsc command. Refer to resetsc.
2. At the superuser (#) prompt in the system console, type the scadm resetrsc command. Refer to scadm resetrsc.

Is there a way to reset the Alom password?

Your selection: To do an ALOM password reset you must choose ‘e’ to erase the NVRAM. After erasing the NVRAM choose ‘r’ to resume the ALOM boot. You will automatically be logged in as the user ‘admin’ with no password and no permissions. The NVRAM settings will also be reset to factory default.

Where do I find the Alom on my computer?

Connect your computer or laptop to the ALOM serial management port. Power cycle the system by unplugging the server’s power supplies, waiting several seconds and then plugging the power back in. You should see the ALOM booting on the serial management console. Hit “Esc” during the ALOM boot, before or at the point where the display says:

Where do I find the Alom on my T1000?

You should see the ALOM booting on the serial management console. Hit “Esc” during the ALOM boot, before or at the point where the display says: The system will return with this message:

How do I get my Alom to work?

By default the alom ask for a passwd, even when one has never been set. you said it has at one time though. If you are able to get into the server, then you just have to download the RSC pkg and install and configure to get the ALOM working. reboot is required to activate it.

https://www.youtube.com/watch?v=ngtF_Ln87Pk