What is FMC LPC?
The FMC LPC Breakout board is a passive adapter for accessing all signals of ANSI/VITA 57.1 FPGA Mezzanine Card (FMC) Standard compliant low-pin count (LPC) connectors. All pins of the connector’s rows C, D, G, and H are routed to a separate pad array on the top and bottom side.
What is LPC and HPC?
The (LPC) connectors provide 68 user-defined, single-ended signals (or 34 user-defined, differential pairs); (HPC) connectors provide 160 user-defined, single-ended signals (or 80 user-defined, differential pairs), 10 serial transceiver pairs and additional clock.
What is FMC HPC connector?
The HPC connector provides 160 user-defined, single-ended signals (or 80 user-defined, differential pairs), 10 serial transceiver pairs, and additional clocks. The HPC and LPC connectors use the same mechanical connector.
What is HPC connector?
The HPC connector is a traditional backplane interface providing rugged mechanical and electrical performance. It enables 3 and 4 row daughter cards to the backplane interface. On board connector guiding and keying are available to control and discriminate daughter-card engagement with the backplane card slot.
What is an FMC module?
FPGA Mezzanine Card (FMC) is an ANSI/VITA (VMEbus International Trade Association) 57.1 standard that defines I/O mezzanine modules with connection to an FPGA or other device with re-configurable I/O capability.
Is FMC+ compatible with FMC?
FMC+ carriers allow for backwards compatibility with FMC mezzanines.
What is a FMC module?
What is FMC cable?
Flexible metal conduit (FMC) has a spiral construction that enables it to snake through walls and other structures. FMC protects electrical wiring in commercial and industrial buildings. Liquidtight flexible metal conduit (LFMC) is a special type of FMC that has a plastic coating.
What FMC means?
Federal Maritime Commission. FMC. Future Media Concepts (digital video and audio training centers)
Can MC cable be surface mounted?
New for the 2017 NEC Code-cycle is section 330.15, entitled “Metal-Clad Cable: Type MC Exposed Work.” This new Code section requires an exposed run of MC Cable to closely follow the surface to which it is mounted while enjoying a new permission that allows the MC cable to be installed on the underside of floor joists.
How many signals are on a FMC pin header board?
Thus, the FMC pin header board enables a variety of applications for digital signal processing and testing. The total number of 68 user signals (LAxx_P/N), 4 user clocks (CLKx_M2C_P/N) and 3 voltage rails (VADJ, 3P3V and 12PV0) from the carrier card connector are routed to the 2.54 mm pin grid on top of the adapter board.
Is the FPGA mezzanine card LPC compliant?
The FMC LPC Breakout board is a passive adapter for accessing all signals of ANSI/VITA 57.1 FPGA Mezzanine Card (FMC) Standard compliant low-pin count (LPC) connectors.
Where are the pins on a FMC breakout board?
The FMC LPC Breakout boardis a passive adapter for accessing all signals of ANSI/VITA 57.1 FPGA Mezzanine Card (FMC) Standardcompliant low-pin count (LPC) connectors. All pins of the connector’s rows C, D, G, and H are routed to a separate pad array on the top and bottom side.
Is the FMC LPC breakout module a loopback device?
The FMC LPC Breakout Module can be hooked up as loopback device by shorting the appropriate pins on the board. We have checked different soldered wire connections at two line rates (1350 MHz and 3375 MHz) with Xilinx IBERT core on Xilinx Artix-7 FPGA (XC7A200T-1SBG484C).