Is a stock Jeep Dana 30 axle 29 spline or 30?
All Dana 30’s are 27 spline. Your rear axle (the Chrysler 8.25″) came in a 27 and 29 spline version.
How many splines is a Dana 30?
All Dana 30’s are 27 spline. Your rear axle (the Chrysler 8.25″) came in a 27 and 29 spline version. P.S. Super 30’s are 30 spline.
How do I know what Dana 30 axle I have?
Dana 30 Axle Identification A Dana 30 cover will look like a rounded square. It should have 10 bolt holes and is 9 inches wide.
Are 28 or 31 spline axles better?
31 spline axles which are about 30% stronger than the 28 spline axles making them a popular aftermarket upgrade for Fox, SN95, and New Edge Mustang owners. Keep in mind that when you upgrade to the 31 Spline Axles, you will also need a 31 Spline Differential to match up with the new spline requirement!
What is the difference between 28 spline and 31 spline?
A 28 spline axle will have a recess in the middle while a 31 spline axle will be solid with just a centering champher (from when it was machined and ground at the factory).
How much power can 28 spline axles handle?
The should be good up to 350-400 depending on how you launch the car.. Ive seen them break on stock cars with stickey tires.
How big are the axles on a Chrysler 8.25?
All Chrysler 8.25 axles are c-clip. 91-96 XJ: Chrysler 8.25 – 27 spline, 1.17″ diameter shafts, 8.25″ ring gear, 3″ axle tube 97-01 XJ: Chrysler 8.25 – 29 spline, 1.21″ diameter shafts, 8.25″ ring gear, 3″ axle tube The switchover to 29 spline is believed to happen in late May of 1996
When did Chrysler switch to 29 spline axles?
All Chrysler 8.25 axles are c-clip. The switchover to 29 spline is believed to happen in late May of 1996 the housings having different carrier races. You can upgrade your 27 spline to 29 spline with a little machine work. Driver and Passenger side axle shafts are the same lengths so they are interchangable.
What is the Spartan locker for Chrysler 8.25?
Description: Spartan Locker for Chrysler 8.25″ with 27 Spline axles. The Spartan Locker by USA Standard Gear is a mechanical locker that replaces the spiders in a standard case. The Spartan Locker’s design does…
Which is Chrysler 8.25 Trak lok 27 spline replacement unit?
Description: CHRYSLER 8.25 TRAK LOK 27 SPLINE FACTORY POSITRACTION REPLACEMENT UNIT FOR LIMITED SLIP EQUIPPED DIFFERENTIALS. THIS IS AN OE UNIT DANA SPICER 73102 OR 73101.