How do you adjust the throttle on a Honda GCV160?
Adjusting GXV160 Governor
- Loosen the governor arm nut on the governor arm.
- Push the governor arm away from the carburetor, and open the carburetor throttle valve fully.
- Holding the carburetor throttle valve fully open, turn the governor arm shaft clockwise fully, and tighten the governor arm nut.
How many horsepower is a Honda GCV160?
Features
| GCV160 | GCV190 | |
|---|---|---|
| Displacement | 9.8 cu in (160 cm3) | 11.4 cu in (187 cm3) |
| Net Power Output* | 4.4 HP (3.3 kW) @ 3600 rpm | 5.1HP (3.8 kW) @ 3600 rpm |
| Net Torque | 6.9 lb-ft (9.4 Nm) @ 2500 rpm | 8.3 lb-ft (11.3 Nm) @ 2500 rpm |
| PTO Shaft Rotation | Counterclockwise (from PTO shaft side) | Counterclockwise (from PTO shaft side) |
What is the valve clearance on a Honda GCV160?
Standard valve clearance: 0.15 ± 0.04 mm (0.006 ± 0.002 in) (IN) 0.20 ± 0.04 mm (0.008 ± 0.002 in) (EX) ⑥. If adjustment is necessary, proceed as follows: a. Hold the adjusting screw using the special tool, and loosen the lock nut. b.
Where is the choke on a Honda gcv160?
Move the choke throttle lever, located on the left of the fuel valve, to the “Choke” position if starting from cold. Use “Fast” or “Slow” if the engine is already warm.
Why does my Honda lawn mower only run on choke?
Only runs smooth on choke usually means there’s blockage somewhere in the carb, often in the main jet or nozzle area. Depending on the specific mower, it can be cheaper/faster/less drama to simply replace the carb.
Why does my Honda engine surge?
The most common reason for a surging lawn mower engine is a blockage in the fuel supply, but there are other possibilities: Bad gas. Bad spark plug. Dirty / faulty carburetor.
Why does my Honda lawn mower idle up and down?
A lawnmower that hunts and surges may be experiencing something as simple as an airflow issue. If the air that the engine requires to run is blocked, especially sporadically, it can cause the engine to slow down. When the blockage moves or clears, the engine may suddenly rev up in response.
How fast is a Honda GX160 engine?
Go Kart with 4-stroke Honda GX160 Engine with Maximum Speed of 70kph | Global Sources.
What is the function of governor in diesel engine?
The governor’s purpose is to control the fuel to the engine cylinders so as to control the speed of the unit, holding the speed constant for all conditions of load imposed on the generator conditions of load imposed on the generator being driven by the engine.
What to do if Honda GCV 160 wont start?
Move the throttle to “STOP.” If the engine won’t start, make sure the fuel valve, choke, and ignition switch (if equipped) are all on. Electric start models may fail to start if the battery is flat, the main fuse is blown, or the battery cables are corroded.
What kind of fuel does a Honda gcv160 use?
SPECIFICATIONS GCV160 GCV190 Fuel Unleaded 86 octane or higher Unleaded 86 octane or higher Oil Capacity 0.58 US qt (0.55l) 0.58 US qt (0.55l) Lubrication System Splash Splash Dry Weight 22.0 lbs (10.0 kg) 27.6 lbs (12.5 kg)
What kind of engine does a Honda hrt216s3da have?
I have Honda HRT216S3DA powered by GCV160 engine. The engine serial # is GJAE1576258. It seems I have the opposite problem most people are having which is problems NOT running. Mine fires up on the first pull and it revs very high (sounds like it’s about to explode).
What kind of timing belt does a Honda GC use?
Honda’s GC and GS engines use the world’s first small engine internal timing belt, designed to last the lifetime of the engine. Small engine timing belts are usually external and are subject to wear caused by dirt. Honda’s internal timing belt runs in oil, eliminating the need for conventional drive gears.