How do I access my Cisco IP Phone web interface?

How do I access my Cisco IP Phone web interface?

How to access the web interface of Cisco 8861 or 7841 phone?

1. Press the Settings button.
2. Select Status.
3. Select Network Status.
4. Select either IPv4 Status or IPv6 Status, depending on which is used.
5. Note the IP Address.

How do I configure my Cisco IP Phone 7940?

How do I configure my Cisco 7940/7960 for SIP service?

1. Press the Settings key. The Settings menu is displayed.
2. Highlight Status.
3. Press the Select soft key. The Setting Status menu is displayed.
4. Highlight Firmware Versions.
5. Press the Select soft key. The Firmware Versions panel is displayed.

How do I enable Web access on my Cisco phone?

Resolution

1. Use Internet Explorer browser.
2. Ensure that the phone is connected to the same network as the computer. Plug the phone directly to the router where the computer is connected to.
3. Check if the web interface of the Cisco phone is enabled. Setup Key > Network > Enable Web Server = YES.

How to unlock Cisco 7960 IP phone?

To get to the unlock config screen, press the “Settings” button, scroll down to “Unlock Config”, and press the “Select” softkey. You will now be asked to enter the password. The default password is “cisco”. As you need to enter this password via the numeric pad, it should be entered as 222444777722266.

How do I connect my Cisco phone to WiFi?

Enable the phone’s Wireless Connection

1. Power ON the phone using the power adapter that came with the device.
2. Press the Setup button on your Cisco phone.
3. Go to Network Configuration and then press the Select key.
4. Go to WiFi and then press the phone’s Right Arrow key to toggle WiFi ON, and then press Set.

How do I log into my Cisco IP Phone?

To Log In to your phone using Extension Mobility:

1. Locate the Cisco 7841 phone at your temporary work station.
2. Press the APPLICATIONS button to access your Settings.
3. Use the Navigation button to select Extension Mobility.
4. Enter NetID by typing into the keypad in a text fashion.

How do I unlock my Cisco IP Phone 7941?

Unlock configuration:

1. Press the “settings” button.
2. Use the “navigation” button and navigate down to “Unlock Config”.
3. Press the “Select” button.
4. Enter password (Default factory password is “cisco”).
5. Press the “Accept” button to unlock configuration.

How do I unlock a Cisco VOIP phone?

1. Unlock Settings – *, *, #.

1. Go to the Settings page of the phone.
2. While in the settings page, press *, *, # (star, star, pound) about 1/2 second apart.
3. The phone will display “Settings Unlocked” and allow you to make changes.

How do I install a Cisco IP phone on my laptop?

ICD users must have IP Communicator open to use Finnesse.

1. Download the IP Communicator.
2. Open the .exe file.
3. Run on your PC.
4. Click the Cisco IP Communicator Wizard and follow the instructions:
5. Click Finish to complete the Audio Tuning Wizard.
6. Set up your device by clicking the Menu icon at the top.
7. Select Preferences.