Can you put a metal halide bulb in a regular light fixture?
Like fluorescent lights, metal halides require a ballast to provide high starting voltages and to regulate current inside the bulb during operation. This is why a metal halide bulb will not work in a standard household lighting fixture — aside from the fact that the larger E39 base will not fit.
Are metal halide bulbs being phased out?
Phasing out A number of popular lighting types will have to be phased out by 2017 including selected ‘standard’ high-pressure sodium (including retrofit), high-pressure mercury, and standard performance metal halide.
What is a mogul light socket?
A mogul lamp or six way lamp is a floor lamp which has a large center light bulb surrounded by three (or four) smaller bulbs that may be candelabra-style or standard medium-base bulbs, each mounted base-down.
Do metal halide lights need ballast?
Metal halide (MH) ballasts are required to start the lamp, regulate the lamp starting and lamp operating currents, and provide appropriate sustaining supply voltage. MH lamp voltage typically increases over time, and the ballast must continue to provide sufficient voltage to the lamp as it ages.
Can I replace metal halide bulb with LED?
LED Offers Long Life, Lower Energy Costs, Instant On and Control Options. A 400 watt metal halide bulb can be replaced with a 200 watt LED. A 100 watt metal halide can be replaced with a 50 watt LED. Implementing an LED replacement program should result in a 50% reduction in annual energy use (kWh) costs.
Why does my metal halide light go on and off?
MH and HPS ballasts will cycle on and off as they heat/cool when the ballast goes. That’s why you gotta sit there for 20 minutes after you fire them up to check for bad ones.
When should I change my Metal Halide bulbs?
Metal Halide lights have an better lifespan relative to old technology like incandescent lights but they have a short lifespan compared to LED. Typical lifespan values range from 6,000 hours to 15,000 hours before a bulb requires replacement.
How hot does a Metal Halide bulb get?
When fully lit, the Metal Halide lamp will reach a temperature of 2000 degrees Fahrenheit and operates at a vapour pressure between 70 and 90 pounds per square inch.
What is a porcelain socket?
Porcelain Lamp Sockets are probably the most durable in terms of withstanding a much higher temperature than most other socket materials. All of the sockets listed below are a medium base (E26) and are UL and CSA listed. Medium Base (E26) Glazed Porcelain Lamp Socket 2 reviews $2.56.
Is Mogul base same as E39?
E39 and E40 are both mogul or large base. The only difference between the two are the length of the center electrode.
Is metal arc the same as metal halide?
Compared to standard metal halide lamps, METALARC PULSE START lamps reach 90 percent of full light output 30 percent faster and have a 60 percent shorter hot restrike time. METALARC PULSE START lamps may be combined with SYLVANIA HID ballasts to form a complete system.
Where do you put metal halide lamps?
Metal-halide lamps are used for general lighting purposes both indoors and outdoors, such as commercial, industrial, and public spaces, parking lots, sports arenas, factories, and retail stores, as well as residential security lighting; automotive and specialty applications are further fields of usage.
What kind of socket do you need for halide bulb?
The socket features a durable, hard composite cardboard, screw shell, lamp grips, and two screws for easy installation. It is pulse-rated, so it is ideal for use with any medium base pulse-start metal halide bulbs. This medium base socket has a porcelain body that is gray glazed with ceramic arc shield, allowing for more heat resistance.
What kind of ballast is used for halide lighting?
Most ballasts (except the electronic ballasts) used for Metal Halide lighting are of the CWA (constant wattage autotransformer) type. This is lead circuit ballast, and consists of a high reactance autotransformer (core-coil) with a capacitor in series with the lamp.
How big is a medium base lamp socket?
Medium Base Socket. The 18 AWG, glass braid SEW-2 lugged leads are rated for 200 degrees Celsius, 600 watts and 600 volts. They are 9 inches long and stripped 1/2 inch for convenience. The socket features a durable, hard composite cardboard, screw shell, lamp grips, and two screws for easy installation.
What are the envelopes of a halide lamp?
This group includes the mercury vapor, high-pressure sodium and metal halide lamps. The basic construction of the lamp is two envelopes – an inner envelope (arc tube) which contains the arc, and the outer envelope (called bulb) which filters out the UV and shields the inner arc tube.