How do you hook up a Power Commander?

How do you hook up a Power Commander?

How to… fit a power commander

1. Position the commander. Find somewhere protected from rain and engine heat to mount the power commander.
2. Connect to the battery. The power commander has one black 12v connector, which goes onto the black negative battery terminal.
3. Connect to the injectors.
4. Check and start the bike.

How long does it take to install a Power Commander?

Most installations take less than 15 minutes, some as little as 5 minutes, and our bikes as much as 2 hours. Changes are made to the bikes fuel via the PC’s onboard microprocessor. Using this technology the Power Commander offers a large area of adjustment without making any permanent changes to the bikes factory ECU.

How do I get dynojet maps?

To install a map on a Power Commander V fuel tuner, you will need to download the Dynojet Power Commander software using a Windows computer (or a Mac running Windows). Once you install the software, it is easy to download maps from the Dynojet.com website.

Can a Harley Davidson power commander be hooked up to a computer?

The great thing about the Power Commander V verses the Harley Davidson dealer standard EFI download is that with the PCV you can always hook it to a computer later and change a base map for free in the event you change pipes or air intake down the road.

Can a dyno jet be installed on a power commander?

Once you have the Power Commander V (PCV) installed then you are ready to install a Dyno Jet Auto Tuner if you choose, which will allow even more fine tuning of your EFI. We also have a tutorial video that will teach you how to install the DynoJet Auto Tuner. The DynoJet Auto Tuner hooks to the Power Commander V (PCV).

Can a power Commander V be used on a motorcycle?

You can just run the Power Commander V on your motorcycle and be good with that. If you get new header pipes, mufflers, or air intake on your motorcycle then you need to at least do a basic re-map of your motorcycle’s electronic fuel injection (EFI), or things will not run properly. That is where the Power Commander V comes into play.

Can a Dynojet auto tuner hook to a PCV?

The DynoJet Auto Tuner hooks to the Power Commander V (PCV). You can just run the Power Commander V on your motorcycle and be good with that. If you get new header pipes, mufflers, or air intake on your motorcycle then you need to at least do a basic re-map of your motorcycle’s electronic fuel injection (EFI), or things will not run properly.