How do I reboot my Aruba Virtual Controller Access Point?

How do I reboot my Aruba Virtual Controller Access Point?

Rebooting an AP

1. In the Mobility Master node hierarchy, navigate to Maintenance > Access Point > Reboot.
2. Select the AP in the Access Point table.
3. Click Reboot.

How do I reboot my access point?

To restart an AP, expand the Access Points section, click the AP’s box on the left side, then click Restart.

How do I reset my access point from Central to Aruba?

To reboot an IAP, complete the following steps:

1. In the Network Operations app, set the filter to one of the options under Groups, Labels, or Sites.
2. Under Manage, click Devices > Access Points.
3. Click an AP listed under Device Name.
4. In the Actions drop-down list, click Reboot AP.
5. Click Reboot to reboot the AP.

How long does Aruba AP take to reboot?

5 to 20 minutes
Each reboot took place 5 to 20 minutes after the last reboot. This has happened already twice this month. Each time the AP’s keep rebooting for hours. Last restart cause mentions “mesh point transitioned to portal” on 4 of the 5 AP’s.

How do I reset my Aruba controller?

(controller) *#exit User: admin Password: (controller) *#write erase All the configuration will be deleted and the controller will be reloaded. Press ‘y’ to proceed : [y/n]: y Write Erase successful System will now restart!

How do I reset my Aruba 305 Access Point?

Power off the IAP. Press and hold the reset button using a small and narrow object such as a paperclip. Power on the IAP without releasing the reset button. The power LED flashes within 5 seconds indicating that the reset is completed.

How do I restart Aruba?

Power on the Aruba Router, place a paper clip or pin into the hole on the Router back which is labelled as Reset. Hold paper clip or pin down for 10 to 15 seconds and release. The Router will reboot on its own. Once the WLAN light stops blinking, the Router is reset.

How do I reset my Aruba RAP?

To reset the RAP, follow these steps:

1. Remove power from RAP.
2. When the power is off, press a pin or paper clip into the reset button, keep it pressed.
3. Insert the power cable, but keep the reset button pressed.
4. Continue to press reset button, and watch the power LED.