What is code 10 on Thermo King?
Thermo King Alarm Code 10: High Discharge Pressure. This shutdown alarm code can be difficult to troubleshoot. Here are a few common tips to make the process a little easier: Check for broken fan belts.
What is code 37 on a Thermo King?
Code 37 has a green status, which indicates that it is OK to run your Thermo King. When you encounter it, start by checking the engine coolant level. If it is within normal levels, check the sensor.
What is code 63 on a Thermo King unit?
Re: code 63 thermoking code 63 (engine stopped, reason unknown) is a generally unhelpful code. Means the engine has stopped, most times this is fuel related (fuel pump, fuel solenoid) or it could be RPM sensor not reading correctly.
What is code 17 on a Thermo King?
Engine Failed to Crank
Code 17 means Engine Failed to Crank when start is requested by the Microprocessor. Check Starter (unfortunately lately new thermoking starters often fail for some reason). Fuel pull in Solenoid failed or its circuit.
What is code 18 on a Thermo King?
18 HIGH ENGINE COOLANT TEMPERATURE. 19 LOW ENGINE OIL PRESSURE. 20 ENGINE ( VAPOR MOTOR CR) FAILED TO START.
What is code 15 on Thermo King?
15 CHECK GLOW PLUGS OR INTAKE AIR HEATER. 16 MANUAL START NOT COMPLETED. 17 ENGINE FAILED TO CRANK. 18 HIGH ENGINE COOLANT TEMPERATURE.
What is code 25 on Thermo King?
Alternator Check
Thermo King Alarm Codes
| # | Color | Description |
|---|---|---|
| 25 | check | Alternator Check |
| 26 | check | Check Refrigeration Capacity (Zone) |
| 27 | take action | Vapor Motor RPM High (CR) |
| 28 | ok | Pretrip or Self Check Abort |
How do I fix code 17 on my Thermo King?
What’s the most effective diagnostic procedure that should be followed for Alarm code 17?
- Check the battery for proper voltage, load test the battery to make sure that the battery internally is able to hold that charge.
- Check the fuse/relay interface circuit board for Fuse that controls the fuel shut off solenoid.
Are there any alarm codes for the Thermo King?
Thermo King Alarm Codes Defined: 00 NO ALARMS EXIST 01 MICROPROCESSOR POWER UP RESET 02 CHECK EVAPORATOR COIL SENSOR
What should temperature be for Thermo King code 63?
Thermo King Alarm Code 63 Each vehicle with Thermo King Code 63 has a different ideal engine working temperature, but the average ideal engine working temperature is in the range of 80-90 degrees.
When did the Thermo King start temperature control?
Thermo King is leading the way to transport temperature control since 1938. From vans, trucks, and trailers to boats and airplanes, Thermo King has a temperature control system that can address all your needs. With this guide you will be able to troubleshoot your Thermo King unit.
What does Red Diamond Mean on Thermo King alarm?
A Red diamond warning indicates an alarm code, which may occur for many reasons. Don’t panic because it’s easy to clear and reset a Thermo King alarm code! Press the check button and the on button at the same time. Release the check button and the on button, then press the equal sign button.