How do I connect my HP 2510 to a console?

How do I connect my HP 2510 to a console?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port….

1. Reconfigure the switch and save the new settings.
2. Reconfigure the terminal and save the new settings.
3. Reboot the switch and re-establish the console session.

How do I reset my HP ProCurve 2510 24?

How to reset a ProCurve 2510-24g to default settings

1. Press in both the Clear and Reset buttons (tiny buttons on the left edge)
2. Release the Reset button after the port lights come on (~2 seconds)
3. When the Self-Test LED starts flashing (to the left of the Clear and Reset buttons), release the Clear button.

How do I reset the password on my HP ProCurve switch?

If you lose or have forgotten a switch password: Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.

What is HP ProCurve Switch?

The HP Procurve managed 24-port switch has 10/100BASE-TX autosensing per port and 2 open transceiver slots for media flexibility. The HP Procurve switch 2524 is ideal for low-cost, managed 10/100 connectivity with uplinks. features.

How do I assign an IP address to my HP Procurve Switch?

HP Procurve Switch # Use the [Tab] key to select the Manager Password field and enter a manager password of up to 16 characters. [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network.

How do I reset my HP ProCurve?

To execute the factory default reset on the switch, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

How do I reset my ProCurve Switch to factory settings?

What kind of switch is Hewlett Packard ProCurve?

The ProCurve Switch 2510-24 is a multiport switch that can be used to build high-performance switched workgroup networks. These switches are store- and-forward devices offering low latency for high-speed networking.

Where can I find a management guide for ProCurve switches?

Management and Configuration Guide Management and Configuration Guide 2510 www.procurve.com ProCurve Switches Q.11.XX ProCurve Series 2510 Switches Management and Configuration Guide July 2007 Hewlett-Packard Company 8000 Foothills Boulevard, m/s 5551 Roseville, California 95747-5551 http://www.procurve.com

What kind of ports does the HP 2510-24 have?

The 2510-24 has 24 10/100 ports and 2 Gigabit dual-personality ports for 10/100/1000 or mini-GBIC connectivity. The 2510-24 is fanless, ensuring quiet operation and making it ideal for deployment in open spaces.

Is the ProCurve switch a trademark of Microsoft?

Publication Number 5991-4761 July 2007 Applicable Products ProCurve Switch 2510-24G (J9019A) Trademark Credits Microsoft, Windows, and Windows NT are US registered trademarks of Microsoft Corporation. Disclaimer