What can I use to clean a fishing reel?

What can I use to clean a fishing reel?

Directions for Cleaning Fishing Reels:

1. Take the reel apart.
2. Strip or tape the line.
3. Rinse.
4. Apply Simple Green Marine All-Purpose Boat Cleaner.
5. Use a toothbrush or small paintbrush to scrub.
6. Make sure to rinse all the cleaner.
7. Thoroughly dry to prevent rust.
8. Apply grease and oil.

Can you use brake cleaner to clean fishing reel?

The brake cleaner is fine in a reel. Personally I don’t care for the smell in close quarters or inside the house, like now, when I tend to do these little chores. Rubbing alcohol does a good job and is cheaper and way less likely to stink a room up.

What type of oil can I use on fishing reels?

Synthetic oils
Synthetic oils are ideal for use with fishing reels. This is because their light and lubricating properties allow them to easily smoothen the moving parts of a fishing reel and prevent friction.

Should you wash fishing reels?

Cleaning and maintaining your rod and reel after every use will ensure you get the most life and enjoyment out of your fishing equipment. The following steps should only take about ten minutes but can save you a lot of time and money in the long run.

Can you spray wd40 on fishing reels?

Reel lubricants Because WD-40 is a degreaser, it breaks down grease and oil. Never use it to lubricate a reel. The basic rule of thumb is to grease gears and oil everything else — sparingly. Too much grease and oil impede the spool and reduce casting distance.

Is White Lithium Grease good for fishing reels?

I personally recommend White Lithium Grease but not out of an aerosol can. Lithium Grease out of an aerosol can will also have an acetone in them and may damage your fishing reel. White Lithium Grease from a tube does not contain an aerosol or acetone.

Can you use rubbing alcohol to clean fishing reels?

High pressure from a hose may drive salt and dirt into the reel’s workings. If you must use a hose, lock the drag down tight and use a spray setting. Rubbing alcohol, aka isopropyl alcohol, is a mild solvent that removes dirt, old grease and grime but does not harm finishes.

How do you degrease a fishing reel?

After spraying reel parts, Thornburn scrubs them with a toothbrush. When using Crystal Simple Green, he rinses the parts with water. You can clean a reel with a degreaser like WD-40, but it leaves a film when it dries that needs to be washed off with soapy water. This adds an extra step.

Can you use WD-40 on fishing reels?

Because WD-40 is a degreaser, it breaks down grease and oil. Never use it to lubricate a reel. The basic rule of thumb is to grease gears and oil everything else — sparingly. Too much grease and oil impede the spool and reduce casting distance.

Is Lithium Grease good for fishing reels?

Fishing also has other chores to attend to, and some of them, should be maintaining your fishing reels and rods, especially after a long season of use. Lithium Grease out of an aerosol can will also have an acetone in them and may damage your fishing reel.