What is the formula for stair stringers?
There are several formulas for calculating the ratio between rise and run; the simplest is Rise + Run = 17 to 18 inches. Using a target run of 10 inches, the rise/run ratio is well within the “safe and comfortable” formula for this stair: 7 5/8 + 10 = 17 5/8 (Step 6).
Can I use 2×10 for stair stringers?
Pressure-treated or cedar 2×10 or 2×12 can be used depending on the depth of the cut-outs you’ll be using. By code you will need a minimum of 3-1/2″ of material left on the stringer after the cut-outs and that area should also be free of large knots which would weaken the stringer.
Do you use 2×10 or 2×12 for stair stringers?
It is acceptable and within building code guidelines to use either 2×10 or 2×12 dimensional lumber to create a set of stairs; however, a stair stringer should not be less than 3.5 inches wide at its narrowest point to provide adequate strength for the load the stairs will be supporting.
Can I use 2×12 for deck stair treads?
Stair treads may be made of a single 2×12, but are often made of two decking boards or 2x6s. A stringer is a wide board, usually a 2×12, that runs at an angle from the landing pad to the deck framing and supports the treads. The stair treads should be at least 36 inches wide.
Can I use joist hangers for stair stringers?
This will reinforce the stair stringer to rim joist connection and distribute the stair weight more evenly onto the deck framing. Cut them to fit the space perpendicularly between the rim joist and the next interior joist. Use joist hangers to fasten the blocking.
How do you calculate stairs on deck?
Multiply the number of boards by the stair width to find how many feet of decking is needed to complete each tread. Finally, multiply this by the number of treads to find the total amount of decking needed for the stairs. Filing in the risers of the stairs will also add to the costs.
What size of wood do I need to build stair stringers?
It is acceptable and within building code guidelines to use either 2×10 or 2×12 dimensional lumber to create a set of stairs; however, a stair stringer should not be less than 3.5 inches wide at its narrowest point to provide adequate strength for the load the stairs will be supporting.
How far apart do deck stair stringers need to be?
Deck stairs are typically made from 2 x 12 stringers spaced about 12 to 16 inches apart. They rest on a solid foundation and are attached to the deck with hangers. They have risers (also called toe kicks), treads and railings. The stairs should be at least 36 inches wide.
How do you build outdoor stairs?
How to Build Outdoor Wood Steps Use pea gravel and wood posts to build steps in your yard. Stairs are the number-one way to get from one level of a building to another. Make a new staircase by building new baluster spindles and newel posts. Once you have installed stairs, you can finish them by adding hardwood.