What do I do when my printer says paper jam but there is none canon?

What do I do when my printer says paper jam but there is none canon?

Please try the following to see if we can resolve your issue:

1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.

Why does my Canon printer keep saying paper jam?

If Canon printer has a paper tray, do not fill the tray to capacity. Overfilling the paper tray is frequently the cause of paper jams. Many printers have sliding mechanisms that allow different types and sizes of paper to be fed into the Canon printer. If the slider is not properly positioned, it can cause a paper jam.

Why is my printer saying paper jam but there is no jammed paper?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Reconnect the power cord to a wall outlet and to the printer.

How do you fix a jammed Canon Pixma printer?

Solution

1. Turn off the printer and unplug it.
2. Retract the paper output tray and open the cover. Important.
3. Check if jammed paper is under FINE cartridge holder.
4. Hold jammed paper firmly in both hands.
5. Slowly pull out paper, so as not to tear it.
6. Make sure all jammed paper is removed.
7. Close cover.

How do I reset my Canon printer after paper jam?

Remove the paper following the procedure below.

1. Turn off the printer, and unplug the power cord of the printer from the power supply.
2. Remove the Cassette.
3. Set the printer upright with the left side down.
4. Slowly pull the jammed paper out so that the paper does not tear.
5. Align the paper, then reload it in the Cassette.

How do I fix paper jam on my printer?

Remove the paper following the procedure below.

1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
2. Open the Rear Cover.
3. Pull the paper out slowly.
4. Close the Rear Cover.
5. Reload the paper, and press the RESUME/CANCEL button on the printer.

How do you clear a paper jam status?

Solution one: Clear the paper jam

1. Step one: Remove any loose paper. Remove any loose sheets of paper from the input tray and the output tray.
2. Step two: Clear the paper jam from the rear of the product.
3. Step three: Open the cartridge access door, and then clear the jam.
4. Step four: Print a printer status report.

How do you reset your printer?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.

What to do if your canon paper is jammed?

Hold the jammed paper with your hands. If the paper is rolled up, pull it out. Pull the paper slowly not to tear it, then pull the paper out. Make sure that all the jammed paper is removed.

How to fix an error 3 on a canon Pixma mp160?

Fixing anError 3 on a Canon Pixma MP160is tough for nontechnical person. It takes an in-depth knowledge to do so. Replacing the card with a correctly formatted card or reformatting the existing card after removing any other data, you can expect the issues to be fixed.

How to get paper out of Canon printer?

1 Press Stop to cancel the print job. 2 Turn off the machine and unplug the power cord. 3 Open the paper output cover. 4 Remove any paper from the front tray. 5 Make sure the jammed paper isn’t under the ink holder. 6 Hold the jammed paper with both hands and pull it out slowly to avoid tearing.