Why is my key stuck in my Impala ignition?
The automatic transmission shifter may fail, or a wire may break near the shifter causing the ignition key to become stuck in the ignition lock cylinder.
What does it mean when your car key won’t come out of the ignition?
One of the most likely culprits for a stuck ignition key is the steering wheel locking mechanism. When a vehicle is parked, the steering wheel can lock. In some cases, the ignition or vehicle isn’t the problem. It can be a worn or damaged key that has lodged itself in the ignition switch.
How do I get my 2006 Impala out of theft mode?
To reset the 2006 Chevy impala anti theft system put the vehicle in the on position without the engine running and let it sit there for 10 minutes.
How do I get my key out of the ignition without the battery?
But if the pin is just stuck for mechanical reasons, sometimes physical force can get it to release. So, try moving the steering wheel back and forth as best you can while you jiggle the key and see if you can get the key to the off position. If not, don’t replace the battery yet. Try jump-starting the car first.
How do you reset the anti theft system on a Chevy Impala?
To reset the alarm all You will need to do is put the key in the ignition of Your car and then let it sit there until the security light on the dash is flashing instead of being on solidly. When that happens You can go ahead and try to crank over the engine and see if it will start.
Can’t Get key in ignition?
A common problem when your key is stuck in the ignition is that the car battery is dead or low on voltage . Charge your car battery for some time with a car battery charger to see if it’s a low voltage problem. Low voltage can cause the ignition lock not to release the key.
Why is my car stuck in ignition?
7 Reasons a Car Key Gets Stuck in the Ignition #1 – Parking Gear Not Set #2 – Steering Wheel Lock #3 – Debris on Key #4 – Dead Battery #5 – Worn or Damaged Key #6 – Damaged Ignition Cylinder #7 – Manufacturer Recall or TSB
What is an ignition lock cylinder?
Ignition Lock Cylinder. The ignition lock cylinder is a mechanical part where the ignition key is inserted to start a vehicle. It’s mounted inside the ignition switch, the electrical component that locks the ignition and “reads” anti-theft coding in the key to allow the vehicle to start. Worn keys can damage “wafer” tumblers or pins inside…