How does Vent Axia work?
Continuous Ventilation works by extracting stale and moist air from the home at a low rate all of the time. Continuous ventilation products from Vent-Axia are designed to work with the natural air infiltration and control the air path from the building thus preventing migration of damaging humidity and pollutants.
Are heat recovery extractor fans worth it?
If you are building a new house, there is no doubt that a heat recovery system (also called MVHR or HRV) can offer substantial savings on your heating bills over using normal bathroom fans and window ventilation but for us the number one reason is the dramatic improvement on indoor air quality (IAQ) improving the …
Which heat recovery ventilation is best?
efficiencies therefore the 95% heat exchanger is the best option. These should be located in or near the wet rooms. Background ventilators in windows are not required with this system.
Should I leave my Vent Axia on all the time?
Do not expect to see an instant reaction after adjusting the sensor, and please remember to leave the fan for at least half an hour to acclimatise.
Can bathroom fans run continuously?
Your bathroom fan may run non-stop because it is designed to do exactly that. It is likely a dual-speed continuously operating exhaust fan that forms part of your house’s mechanical ventilation system. It runs continuously to provide a continuous stream of fresh air.
Does an HRV dehumidify?
HRV / ERV’s are a very cost effective way of reducing indoor humidity levels when the outside air is colder than the inside air of the home, the colder the air the greater the capacity for an HRV/ERV to dehumidify. If you have the VanEE ERV with the Platinum Control, it will do this work for you.
Should you run an HRV continuously?
HRVs and ERVs do require energy to run, but this energy is offset by the heat recovered from the exhaust air. To ensure that you home is well-ventilated and maintains good air quality, your HRV and ERV should run continuously.
Are heat recovery systems worth it?
Of course, the main benefit of heat recovery is that there’s less wasted heat, which means less money wasted on fuel costs. If you live in a newer home that’s well-insulated and sealed up tight, then the extra fresh air you’ll get from a heat recovery ventilator will be well worth the cost.
Should I run my HRV in the summer?
The answer depends on your home’s air conditioning system, your ERV wall control, the outdoor temperature and, most importantly, the outdoor relative humidity. As a rule of thumb, if you are more comfortable outside than inside your house, you should run your air exchanger in the summer.
What should a humidity fan be set at?
Unless there are special humidity conditions in the bathroom, setting your humidistat on 60% or so should solve all the problems (see the manufacturer’s specs and ask your electrician about more precise advice).
What is summer bypass Vent Axia?
The summer bypass is set for both comfort temperature and minimum external temperature. This allows a home to be pre-cooled for the following day by taking advantage of cooler night-time temperatures.
How does the Vent Axia heat recovery unit work?
The Vent Axia Team. Heat recovery ventilation unit for through the wall installation which exhausts stale air whilst introducing warmed fresh air from the outside. As a heat recovery ventilation unit it moves a useful 153 l/s of air.
Where to install mechanical ventilation with heat recovery?
MVHR (mechanical ventilation with heat recovery) is a whole dwelling ventilation system that supplies and extracts air continuously at a low rate with the facility to be boosted as required meeting Building Regulations Part F System 4. The unit is normally installed in the loft space or cupboard and rigid ducting supplies fresh…
What are the different types of energy recovery ventilation?
Energy Recovery Ventilation (ERV) Options The ERV range consists of two unit sizes (ERV1000 and ERV1500) each available with two versions of control and unit functionality (Basic and Standard) and two versions of the heat recovery cell (55% and 90% efficiency) giving 8 models in total. The frameless single skinned construction,…
How big does a Vent Axia cable need to be?
Multi-core flexible cord specially manufactured for use with all Vent-Axia Standard and T-Series units. White sheath with colour coded cores. Available by the metre (minimum 5m) or by the 50 metre coil. Cut lengths (per metre): Features & Benefits: Cable size: 0.75mm² Downloads Catalogue Pages