What is PEEK material used for?
Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, HPLC columns, compressor plate valves, and cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications.
Is PEEK a Teflon?
PTFE is an outstanding electrical insulator over a wide range of temperatures and frequency. PTFE is a thermoplastic. PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures.
Is PEEK a good bearing material?
PEEK is a high performance thermoplastic that is tough, strong, rigid, and creep resistant. Bearing Grade PEEK has been reinforced with carbon fibers with graphite and PTFE lubricants. It offers the lowest coefficient of friction, and the best machinability of the PEEK grades.
What is PEEK material properties?
PEEK (polyetheretherketone) is a high-performance engineering plastic with outstanding resistance to harsh chemicals, and excellent mechanical strength and dimensional stability. It offers hydrolysis resistance to steam, water, and sea water.
Is PEEK plastic flexible?
Implant Material: PEEK is quite flexible, durable and strong in nature. For this reason, PEEK, which has a high temperature resistance and low moisture absorption, is an apt choice.
Is PEEK FDA compliant?
PEEK is a high performance engineering thermoplastic that offers chemical and water resistance higher temperatures (continuous to 480°F (250°C)). PEEK also has a V-0 flammability rating and unfilled PEEK is FDA compliant.
Is PEEK material flexible?
Implant Material: PEEK is quite flexible, durable and strong in nature. It does not harm the human body or skin so it is useful to repair soft tissues and for use as skin grafts. For this reason, PEEK, which has a high temperature resistance and low moisture absorption, is an apt choice.
Is PEEK stronger than steel?
The inherent low specific gravity of VICTREX PEEK (1.3 g/cm3) is less than half that of aluminium and one sixth that of steel. This results in a superior strength-to-weight ratio so VICTREX PEEK-based compounds can offer equivalent strength and stiffness with up to 70% weight reduction.
What is Peek plastic used for?
PEEK plastic, also known as polyetheretherketone, is ideal for components used in harsh environments that require excellent chemical resistance over a wide range of temperatures. PEEK is engineered resin designed to perform well applications that require and hydrolysis resistance while maintaining stiffness with PEEK…
Is Peek an elastomer?
PEEK (Polyetheretherketone) PEEK is a high temperature, semi-rigid elastomer offering a combination of chemical, mechanical and thermal properties. PEEK is excellent for water and steam applications at high temperatures and pressures to 6000 PSI (400 BAR) while providing good corrosion resistance.
What is peak material?
WHAT IS PEEK MATERIAL? PEEK material (polyetheretherketone) is a high-performance semi-crystalline engineering thermoplastic with outstanding harsh chemical resistance, very low moisture uptake, good fire performance, excellent mechanical strength across a broad temperature range, and good dimensional stability.
What is polyetheretherketone or peek?
Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Nov 26 2019