How do you reset the drum on a Brother HL 5350dn?

How do you reset the drum on a Brother HL 5350dn?

To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.

What does the flashing drum light mean on Brother printer?

The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.

How do you override a drum on a Brother printer?

FAQs & Troubleshooting

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do you reset the drum counter on a Brother HL 5370DW?

Reset the drum counter: Press and hold down the Go button for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release the Go button. Do not reset the drum counter when you only replace the toner cartridge. Take out the drum unit and toner cartridge assembly.

How do I reset my brother 5340D printer?

Brother HL-5340D and HL-5370DW Toner Reset Instructions When all three LEDs are lit, release the Go-button. Double-click the Go-Button button, and the three LEDs should be lit again. Press the Go-Button button six times. Close the front cover and the toner counter must be reset.

What does drum light mean?

The Drum LED continues to light if the drum counter was not reset when you replaced the drum.

How do I reset my drum light on my Brother?

What happens if you don’t replace the drum in a printer?

A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.

What happens if I don’t replace printer drum?

How do I reset drum life?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Press and hold OK for 2 seconds.
4. Press the Up arrow key or 1 to reset the drum counter.
5. Close the front cover.