How much HP does a 352 have?
| 1960 Ford 352 High Performance Engine Specifications | |
|---|---|
| Type | 90 overhead valve V-8, cast iron block/heads, 2-bolt mains |
| Displacement (ci) | 352 |
| Advertised horsepower | 360 @ 6,000 rpm |
| Advertised torque | 380 lb-ft @ 3,400 rpm |
Is the Ford 352 a good engine?
In the day, the 352 was the “Intercepter Special V8” motor used by police departments everywhere. If you’re talking about one of the Ford FE engine 352s (made from 1958 to 1976), then yes, it’s a very good engine.
When did Ford stop making the 352?
The 352 engine was utilized from 1958 through 1967 in vehicles ranging from police interceptors to family cars and pickups. The 352’s 10-year production run was a result of its strength and durability.
Is a Ford 352 block the same as a 390?
The 352 is a 4.00″ bore block and the 390 is 4.05″. They all had the same nominal cylinder wall thickness (except 427s) regardless of bore size.
What’s the difference between a 351 and a 352?
A 351W can stand higher rpm use at the same power level with stock parts than a 352, you will need better rods. The 352-360 rod is pretty weak. If you build a 390 with post ’66 stock rods and ARP bolts the field is evened up.
What did the 352 come in?
By 1959 the 352 would be used in most of the Ford lineup including the Galaxie 500 and the Fairlane 500. The 352 is often referred to as the Interceptor which was a name that Ford gave the engine model.
Is a Ford 352 Y block?
The 332, 352, 390, 406, 427, 428 engines are FE blocks, not Y-blocks. Any easy way to tell them apart is the distributor.
Is a Ford 352 a fe block?
Introduced in 1958 as part of the Interceptor line of Ford V8 engines, the Ford 352 of 351.86 cu in (5.77 L) actual displacement was the replacement for the Lincoln Y-block. For the 1959 model year, the FE engine series was renamed the Thunderbird V-8 and the Thunderbird Special V-8.
What is the difference between a Ford 351 and 352 engine?
What was the horsepower of a Ford 352?
The 300 hp 352’s produced from 1958 through 1962 were rated at 380 to 395 ft-lbs of torque. Pretty good numbers for a “small” motor. A buddy and I back in the early 80’s used to race a 65 f100 with a 352.
What kind of crank do I need for a 352 Ford?
A 390 crank will fit your block if you can find one, as will better heads, intakes, cams, pretty much any good stuff from the bigger power FE’s will work on a 352. A point of interest, most FE’S have 352 written on the block, regardless of cubic inches.
How big is a 352 cubic inch engine?
352 The FE/FT 352 cubic inch big block V-8 premiered in 1958 as a replacement for the previous Lincoln Y-block motor. Actual displacement was 351.9 cubic inches (5.8 L) with a 3.5 inch (88.9 mm) stroke and 4 inch (101.6 mm) bore.
Is the Ford 352 a low riser intake?
The early 60’s 352 heads (C0AE and C2AE) are really decent flow wise and will accept any aftermarket low riser intake. In 1960 Ford put out a 360 Hp version of the 352.