How do you inject chlorine into well water?
Chlorine is injected with a pump (commonly known as a chemical injection pump, a chemical feed pump or a chemical dosing pump) into the water between the well and the bladder (or pressure) tank. It then runs through a large retention tank to allow contact time.
How much does a well chlorinator cost?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200.
Is a chlorinator good for well water?
Often combined with a water filtration system, Chlorination Systems are an excellent and cost-effective way to disinfect drinking water supplies, eliminate odors, and oxidize iron and other metals. The two most common methods of chlorination for residential well water systems are: Chlorine bleach (sodium hypochlorite)
How much does a chlorine injection system cost?
Chemical injectors for chlorine purification cost $600 to $1,500 to install.
Can you put chlorine tablets in a well?
Pool chlorine tablets can be used in wells. Ground wells require maintenance just as other household components and one of the most important tasks is disinfecting it. Disinfecting a ground well involves adding chlorine which kills bacteria and microscopic organisms living in the water.
What type of chlorine is used for drinking water?
Chloramines are a group of chemical compounds that contain chlorine and ammonia. The particular type of chloramine used in drinking water disinfection is called monochloramine which is mixed into water at levels that kill germs but are still safe to drink.
How long should you wait to drink water after you chlorinate a well?
Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.
How much chlorine should I put in my well water?
CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.
How often should you chlorinate a well?
every 3 to 5 years
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How much chlorine should I put in my well?
How do you get chlorine out of well water?
Chlorine can be removed by running the water through a filter with activated charcoal, in granular or particle form. The carbon works by adsorption , the molecular bonding of the chlorine ions to the surface of the charcoal.
How do you chlorinate a well?
Chlorinating the Well Turn off the circuit breaker feeding the pump. Open the vent or remove the test hole plug. Pour in the bleach. Attach the hose. Recirculate the water. Test for chlorine. Wash down the sides of the well. Test for chlorine indoors. Wait 12 to 24 hours.
What is Chlorine injection system?
Chlorine Injection. This system dispels iron, bacteria, and hydrogen sulfide. To do this, a chemical feed pump injects chlorine into the incoming water on an on-demand basis. From there, the chlorine undergoes a chemical reaction (oxidation) with the iron, bacteria, and hydrogen sulfide in the water in a mixing tank.