How do I enable AHCI in Windows 10?

How do I enable AHCI in Windows 10?

Right-click the Windows Start Menu once more. Choose Command Prompt (Admin). Type this command and press ENTER: bcdedit /deletevalue {current} safeboot (ALT: bcdedit /deletevalue safeboot) Reboot once more and Windows will automatically start with AHCI drivers enabled.

How do I know if AHCI is enabled in Windows 10?

Click the arrow next to “IDE ATA/ATAPI Controllers” to display the list of controller drivers currently used by your system. d. Check for an entry that contains the acronym “AHCI.” If an entry exists, and there is no yellow exclamation mark or red “X” over it, then AHCI mode is properly enabled.

How do I change IDE to AHCI without repairing reinstalling Windows?

How to Switch from IDE to AHCI without repairing/reinstalling…

1. Run the Registry Editor (regedit.exe)
2. Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci.
3. Set the “Start” value to 0 (zero)
4. Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide.

How do you switch from AHCI to RAID without reinstalling Windows 10?

Making sure you go into safeboot mode

1. After changing the registry setting set the default boot mode to Safe Mode, use msconfig.exe or open an admin cmd/PowerShell window and run: bcdedit /set ‘{current}’ safeboot minimal.
2. Reboot and hit F2 to enter the BIOS.
3. Change the SATA mode to RAID.
4. Save and reboot.

Is AHCI better than IDE?

The difference between AHCI and IDE is that AHCI is a newer interface to transfer data between the system memory and SATA storage media while IDE is an older interface used to transfer data among the computer and the storage drive. In brief, AHCI is much faster than IDE.

Is raid better than AHCI?

If you are using a SATA SSD drive, AHCI may be more suitable than RAID. If you are using multiple hard drives, RAID is a better choice than AHCI. If you want to use an SSD plus extra HHDs under RAID mode, it’s recommended that you continue using RAID mode.

Which is better AHCI or IDE?

How to enable AHCI in Windows 10 after installation?

Steps to Enable AHCI in Windows 10 after Installation. 1. Press Win+R to open the Run window. Type regedit and hit Enter to open the Registry Editor. 2. As the Registry Editor opens, go to the following location HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorV. 3. Select iaStorV.

Do you need to enable AHCI in BIOS / UEFI?

If you wanted to install Windows using AHCI instead of IDE, then you would normally need to have AHCI enabled in BIOS/UEFI first. This tutorial will show you how to enable AHCI in Windows 8/8.1 and Windows 10 after you have already installed the OS (operating system) with IDE by mistake.

Can a disk controller be used in AHCI mode?

The matter is that operation of disk controllers in AHCI mode is supported in operating systems beginning with Windows Vista. That is, if you connect a disk with Windows XP to the system with AHCI-enabled controllers, you will run into a BSOD error (“the blue screen of death”).

How to enable AHCI mode for SATA without BIOS?

Method One 1 Go to Device Manager 2 Open the section “IDE ATA/ATAPI controllers” 3 If there is a device containing “AHCI” in its name as in our case, it means that AHCI mode is used in this computer.