What lights should be on my Shaw modem?
Each Shaw modem has an online light, which should be a solid light when things are working well. If the online light is flashing, you may have a connection issue. Hitron modems: lit up ‘@’ symbol, located 4th light down on front. All other modems: 4 light down on front with ‘Online’ label.
What do the flashing lights on my Shaw modem mean?
scanning for network connectivity
Flashing indicates the modem is scanning for network connectivity. When solid, these lights indicate that a connection has been detected. If flashing, this indicates that data is currently transmitting through this ethernet port. When light is solid or flashing, data is transmitting over the wireless network.
How do I know if my Shaw modem is working?
How do I check if my Internet modem is online and functioning properly?
- If you have a BlueCurve Gateway, you should see a white solid light at the top corner. You can also verify your gateway status in the BlueCurve Home app.
- If you have one of the other Shaw modems, the first 4 lights should be solid.
What do the symbols on hitron router mean?
Green, flashing: The router is searching for a downstream frequency on the CABLE connection. Green, steady: The router has successfully located and locked onto a downstream frequency on the CABLE connection. Blue: The router is engaged in channel bonding on the downstream connection.
Why is the modem blinking?
A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.
What does a blue light mean on a modem?
Blue: Blue modem lights can show a firmware update is in progress, the modem is connecting to another device for pairing, a provider has been detected, and the connection process has begun, the connection process has been completed, and a phone call is in progress.
Why is my modem flashing white?
Let’s take a look at the meaning of the Spectrum modem lights; The flashing white and blue light – This implies your modem is still establishing a connection. The white solid light – This indicates the modem is operating on DOCSIS 3.0 Bonded State i.e., Standard Speed 1Gbps Internet.
Why is the green light flashing on my modem?
LAN: A blinking green light is normal. This indicates traffic/usage on the local network. INTERNET: The internet light should never be on. A blinking light means you are having difficulty connecting to the internet.
How do I reset my Shaw WiFi modem?
Locate the small pin-hole reset button located on the back of the Shaw WiFi Modem. Push and hold this button down for 15 seconds with a paper clip or pen. This will cause the modem lights to begin to flash and after a few moments, the modem will come back online.
What lights should be on my modem?
Should all the lights on my modem be green? The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.
Why is my Shaw Internet not working?
Power cycle your equipment Restarting your equipment is often the quickest way to solve Internet connectivity problems. Unplug the power cord from your Shaw modem. Wait at least 30 seconds, then plug the power cord back into your modem. Wait a few minutes until the modem comes back online.
Should the lights on my modem be flashing?
INTERNET: The internet light should never be on. A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power.
Are there any wireless modems for the Shaw network?
Here is a look at the Shaw’s wireless modems. Click on the modem name or image for a detailed equipment guide. Shaw currently has two wired modems. Click on the modem name or image for a detailed equipment guide.
What do you need to know about the Shaw fibre + Gateway 2.0?
You’ll also find factory reset and WPS buttons for resetting the modem or connecting devices via WPS. Connections on the Fibre+ Gateway 2.0 include: Specifications of the Fibre+ Gateway 2.0 include: The Fibre+ Gateway 2.0 has a single light on the top to indicate the modem status.
What does the white light on the fibre + Gateway 2.0 mean?
The Fibre+ Gateway 2.0 has a single light on the top to indicate the modem status. The light will be a solid white colour when the modem is up and running. If the modem is reset, it will go through the following sequence of lights as it reboots:
Why does my Shaw Bluecurve red light keep showing up?
The red led color isn’t supposed to show up anymore, however it previously meant that the modem was online but still in captive portal and awaiting customization. Check the bottom of the modem and try completing the initial setup. This also indicates that the firmware of the modem is out of date.