How do I reset my Whirlpool Duet dryer?
Resetting your Whirlpool Duet Dryer is very easy. All you have to do is turn it off and unplug it. Keep the dryer unplugged for at least one minute, plug it back in, then switch it on to finish the process.
What does F3 mean on Whirlpool dryer?
The “F3” fault code is displayed because the dryer is not heating. The first thing to check and verify is the voltage supply. The dryer must have 220 volts or it will run but not heat. If the dryer is getting the correct voltage then I would disconnect the power cord and then remove the top panel.
How do I fix code F01 on my Whirlpool Duet dryer?
The Whirlpool Duet Dryer F01 error may be able to be fixed with a simple reset of the main control. Unplug the dryer for 1 minute and plug it back in this will reset the control if the error persists after that you will need to check the dryer thermal fuse. The fuse is located on top of the blower wheel housing.
What does F1 and E1 mean on a Whirlpool dryer?
A “F1E1” code in the display indicates there may be an issue with the control unit or the associated wiring. Touch POWER, select a cycle, then hold START/PAUSE button to start the dryer. If this is unsuccessful, unplug the dryer.
Does a Whirlpool Duet dryer have a reset button?
Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.
Where is the reset button on my dryer?
Many dryers are equipped with a reset button on the control panel.
What does F01 mean on a whirlpool duet dryer?
Whirlpool Duet Dryer F01 Error. The F01 error code means the primary control unit in the dryer has failed and will have to be replaced.
What does LC mean on a whirlpool dryer?
Lc means your control lock is engaged. Look on your control panel and there should be a control lock button that you need to press and hold for 5 seconds and that should unlock your control panel.
What does PF code mean in a whirlpool electric dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.